98c question (please help me)
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Which Gun is Best
Forum Description: Need Advice? Ask the pros.
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=139774
Printed Date: 21 December 2025 at 12:08pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 98c question (please help me)
Posted By: macg1
Subject: 98c question (please help me)
Date Posted: 10 August 2005 at 10:25pm
| is there any way to get a 98 custom double trigger that u can accually rock or walk or watever its called? i mean shooting with your fingers switching back and forth.??? I no that there is a double trigger for comfortability but thats not what i want. i dont want response trigger either............ |
Replies:
Posted By: cdacda13
Date Posted: 10 August 2005 at 10:31pm
| e-bolt it |
Posted By: hybrid-sniper
Date Posted: 10 August 2005 at 10:44pm
| E-Bolt, with lots of trigger mods and you should have a more or less walkable gun. |
Posted By: SuzukiRider987
Date Posted: 10 August 2005 at 11:12pm
|
If you want an easy to walk 98 then get the E-bolt. ------------- http://www.macdev.net - MacDev Militia http://www.alienpb.com - Alien - Because winning is more fun. |
Posted By: bronco9588
Date Posted: 11 August 2005 at 9:21pm
| how big are your pockets? |
Posted By: woodzballer08
Date Posted: 12 August 2005 at 12:53pm
|
if less than $100 you should get the responce trigger, it has a screw that you can put in for turneys, you can give yourself a trigger job, it DOSENT USE MORE CO2 is uses the extra gas from blowback instead of using a 9 volt battery, however you will need an anti syphon so you dont see "snow" comeing out of the barrel or bolt housing. ------------- Getting bunkered is like having sex in prision; it will happen weather you like it or not. |
bronco9588 wrote:Posted By: bronco9588
Date Posted: 12 August 2005 at 10:32pm
|
Here is what you do.
1) get a pen sring, small pliers, and an allen wrench. Cut one piece the same length as the front trigger reset spring. 2) some people take another spring and shape it to the distance of the sear spring. I streatch the factory sear spring, but be careful. Too much and its ruined. You can also use rubber bands from the ortho. 3) The biggest bang for your buck- get a capri sun straw and put it on the pin that the sear spring rests on. You can also use tape. 4) drill a hole in the the front of the trigger, but before where the trigger rests. Tap the hole, and put a matching Cap screw. *** steps 3 and 4 need some tuning so the trigger shots when you pull it, and the sear resets when you cock it. I have tuned my gun so much that i can not physically engage my safety. There are more things you can do, but they are a wate of time, Id also suggest a double trigger. Hope this helps. If these instructions are unclear, just do a search. |