custom pro
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Which Gun is Best
Forum Description: Need Advice? Ask the pros.
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=141109
Printed Date: 28 April 2026 at 4:53pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: custom pro
Posted By: mctippy
Subject: custom pro
Date Posted: 01 September 2005 at 4:22pm
| I bought a new custom pro.I was using co2 it shoot like **edited** people said to get hpa. Do I need the low presure kit for hpa or can I run with out it. |
Replies:
Posted By: mod98commando
Date Posted: 01 September 2005 at 4:42pm
|
The custom pro is basically the same (in terms of design) as the 98
custom so you shouldn't need the low pressure kit to use compressed air
instead of CO2. You'll only need the low pressure kit if you get a low
pressure output tank. Compressed air tanks are available with high
pressure outputs (800 psi roughly) and those don't require the kit but
the ones that put out like 400psi and lower will most likely need it to
get your velocity up. I'm pretty sure the valve in the custom pro is
the same as the 98c so as long as you have a high pressure output tank
you should be able to use it without any other mods. Don't confuse the
internal pressure with output pressure though. Internal pressures will
be 3000 psi or 4500 psi most likely (i think there are a few others
that are less common) and output pressures are about 800 psi for high
pressure and probably 400 psi and under for low. I think they also sell
adjustable ones that can work with high or low pressure setups but i
wouldn't buy one unless you plan on going with low pressure in the
future.
------------- oreomann33: Everybody invades Poland Rofl_Mao: And everyone eats turkey Me: But only if they're hungary Mack: Yeah but hungary people go russian through their food and end up with greece on everyth |
Posted By: SuzukiRider987
Date Posted: 01 September 2005 at 6:59pm
|
What's wrong with how it's shooting? It might not be the co2 at all. ------------- http://www.macdev.net - MacDev Militia http://www.alienpb.com - Alien - Because winning is more fun. |
Posted By: Styro Folme
Date Posted: 01 September 2005 at 8:52pm
|
HPA is good for any gun. even if it's the custom pro, you can trade for another gun and not worrie about the tank..... ------------- X |
Posted By: Cormier
Date Posted: 01 September 2005 at 10:32pm
|
guy my friend has a custom pro and he uses c02 and doesn't have any problem with it ------------- ya ever noticed in a beer commercial no one ever drinks a beer? |
Posted By: mctippy
Date Posted: 01 September 2005 at 11:08pm
|
it fires well on co2 when i use good balls. also when I use cheaps balls it sucks even more im looking for thelong range acc. because it is a new gun nothing wrong with it |
Posted By: Strife_17
Date Posted: 02 September 2005 at 9:48pm
| ...velocity at or around 280-300? |
Posted By: tippmanncp
Date Posted: 25 September 2005 at 9:28pm
it should run fine on co2 probably the velocity ------------- http://www.abandofbrothers.com/ - Band of Brothers Proudly Sponsered by http://www.missionmasters.com/mm/missionpaintball.htm - Mission Masters |
Posted By: peanuthead
Date Posted: 25 September 2005 at 10:57pm
|
i bought a custom pro about a weak ago and i use c02 and dont have a
promblem and i cheep balls i turned my volocity down a little bit and
now i can hit a tpost prety good at about 15 to 20 feet |
Posted By: ANARCHY_SCOUT
Date Posted: 25 September 2005 at 11:28pm
|
Yes they both use the same cvx valve. ------------- Gamertag: Kataklysm999 
|
mod98commando wrote:Posted By: paintboy123
Date Posted: 26 September 2005 at 6:08pm
|
yu should just get hpa and if u got custom pro e co2 could freeze the electronics and co2 can cause horrable velocity spikes. you only need a lpk if its low pressure tank ------------- 98c 2 20oz tanks 14'' smat parts AA 4+1 pack tippmann mask that came w/ gun |