Print Page | Close Window

RT trigger hard to pull

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=142622
Printed Date: 13 May 2026 at 10:24am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: RT trigger hard to pull
Posted By: philmann 98
Subject: RT trigger hard to pull
Date Posted: 01 October 2005 at 7:42am
MY RT trigger after firing off few rounds gets hard to pull, like its pressurizing up and it will only shoot single shot. it doesn't always do it but its getting more frequent. why????? 

-------------
OOOO What a RUSH!!!



Replies:
Posted By: Snake6
Date Posted: 01 October 2005 at 7:51am

Have you sweet spotted it?

No?

Thats why.

To sweet spot it, use a small screwdriver and adjust the screw fitting on the side of the handle until you get enough trigger bounce to fire off continous bursts.



-------------


Posted By: rossy11223
Date Posted: 01 October 2005 at 11:33am

The airflow adjustment screw is turned in all the way and there is no air going to the piston. Turn it out and fire. Keep turning it until you can get the trigger to bounce off your finger.



Posted By: The Guy
Date Posted: 01 October 2005 at 2:11pm
chances arer you have the valve all the way in one direction. Which is why it isn't working right. Its been so long since I had an R/T I can;t remember.

-------------
http://www.anomationanodizing.com - My Site


Posted By: Lightningbolt
Date Posted: 01 October 2005 at 2:53pm
open that baby up some.


Posted By: The Guy
Date Posted: 01 October 2005 at 2:57pm
heh actually you ^^^ were there when I sold my R/T to KRL.

-------------
http://www.anomationanodizing.com - My Site


Posted By: tigman250
Date Posted: 01 October 2005 at 3:02pm
Originally posted by rossy11223 rossy11223 wrote:

The airflow adjustment screw is turned in all the way and there is no air going to the piston. Turn it out and fire. Keep turning it until you can get the trigger to bounce off your finger.

actually the flow controll meters out of the cylinder not in, that's why the trigger pull is so hard when you have the screw all the way in, the flow controll won't let any air out! that's what makes it work so well it actually slows how fast you can pull the trigger for the next shot.



-------------
http://img76.imageshack.us/my.php?image=stickemup6of.jpg">



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net