polished internals
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=142638
Printed Date: 28 December 2025 at 1:33am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: polished internals
Posted By: svillesoccer16
Subject: polished internals
Date Posted: 01 October 2005 at 4:55pm
|
what do polished internals do. what do you have to do to polish them. ------------- tippmann 98 custom bullet drop forward 20 oz. co2 http://www.sloganizer.net/en/"> 
|
Replies:
Posted By: Sargent Duck
Date Posted: 01 October 2005 at 5:03pm
|
Usually I'd tell ya to go find it using the "search" button, but since your new here, I took the liberty of doing it for you. http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=1 39772&KW=polish+internals ------------- Ref: I want a nice clean game player: but it's paintball! |
Posted By: Sureshot3091
Date Posted: 01 October 2005 at 5:09pm
That and the fact that you're probobally really bored lol... Here ya go, Courtesy of WKS_Weiner There are two ways to polish the internals of a 98c. one way is to use steel wool... 
it cost about $2. you can find it at any hardware store. but make sure you get the right kind.... 
...make sure you get #000. as shown in this pic. you don't wan't to messup your gun or anything. first step... 
take apart your gun. remove all the inernals. then clean up all the gun oil that is on the left and right receivers.. 
...when you start polishing the receviers... 
....the best place's to start are the, back and front bolt areas, in the area were the linkage arm moves Around, in the area were the sear moves around and any other place you feel like. just remember to polish the same areas on both recivers. also when you use steel wool to polish the 98c i may get alittle messy. so when your done wash off both recerviers with running water and dry throughly. make sure no left over steel wool is on both receivers. if there is this will cause major problems. when done washing and drying put gun back together and you are done.this will help your 98c in the long run... the other way is to use a dremel tool. i don't have one yet so if someone has one please post how to on this thread, thank you. using steel wool is the cheapest way to polish the internals but not the easiest way. also if you own an a-5 you can polish your internals also the same way you can a 98c. ------------- http://img329.imageshack.us/my.php?image=picture0020xo.jpg"> 
My new baby :-P Stiffy2008 said, "wat is a noob?" |
Sargent Duck wrote:Posted By: SuzukiRider987
Date Posted: 01 October 2005 at 5:43pm
|
Look here http://www.model98.org/mods/polishingint.php - http://www.model98.org/mods/polishingint.php . ------------- http://www.macdev.net - MacDev Militia http://www.alienpb.com - Alien - Because winning is more fun. |