Print Page | Close Window

Tippmann 98 sniper body real gun

Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Paintball Ideas / News From Tippmann
Forum Description: Got a new idea or a way to improve something?
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=144079
Printed Date: 27 May 2026 at 12:19am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Tippmann 98 sniper body real gun
Posted By: K1LL3R_A-5
Subject: Tippmann 98 sniper body real gun
Date Posted: 27 October 2005 at 5:52pm

ok im thinking about taking my 98 custom and buying a composite material stock for a bolt action rifle.  i am going to design the 98 custom in autocadd and see how i can make it fit into the stock.  I do not want it to be a pistol grip stock.  I will make the trigger like the trigger on a normal rifle.  i am planing on doing that by makeing my own electronic trigger (cost under $25 for parts).  i want to get or make bolt action parts, but use the bolt action to store a 12 gram co2.  So instead of the bolt action feeding rounds, i want to seal it off and make it feed co2.  I was thinking that i could probably make a adapter that looks like a 12 gram co2, but will let the Co2 pass threw the bolt action part, to alow the use of a 4oz-9oz co2 tank in the stock.  as for ball loading, i would pretty much seal off the old hole in the 98 custom, and cut off the front handle.  i was planning on making it feed paintballs from the bottom, i would use something like the spring powered tubes used in the long bow sniper (made by spec ops).

if anyone has any suggestions, or has done this before, please let me know.  also if anyone would like to help with with metal smithing that would be great.  i am a poor 16 year old with huge ideas, and i have little money for the cost of milling and also little access to machinists.  if i can make my 98 custom a "sniper look", and once its perfected, i am planning on moding other peoples 98 customs if they want.

 

thanks josh




Replies:
Posted By: hybrid-sniper
Date Posted: 27 October 2005 at 7:24pm

I'm impressed you are actively pursuing this. Almost everyone just says "We should do this" and don't have any plans of doing it themselves. So, props if you can make it work.

Good luck.



Posted By: *A-5* (MilSim)
Date Posted: 27 October 2005 at 7:41pm
WOW i'm giving youhats off just for attemping this, i'm not saying its gonna be uber hard i'm just saying that alot of people say "i'm eventually gonna try this" or "someone should do this". if you get this done BE SURE TO POST PICS! can't wait to see this after you complete it!

-------------
http://www.specialopspaintball.com/brigade/member_view.asp?id=45020">


Posted By: Mr. Heckler
Date Posted: 27 October 2005 at 7:52pm
I am impressed. There have been many threads about it, But no one has done it. To you, good luck I say.

-------------
The Tippmann Forums.....My Anti-Drug.

-98Custom
-Flatline
-6-Position Collapsible Stock
-32 Degrees Remote Hose
-Crossman Red Dot


Posted By: Monk
Date Posted: 27 October 2005 at 9:06pm
Im having a hard time following what your wanting to do.

Could you post a pic, made in like photoshop or ms paint?

Out of what I gathered, it should be a cool project.


Posted By: Bonte
Date Posted: 27 October 2005 at 9:08pm
get a qloader to load it from the bottom. Google it

-------------
Tippmann 98 Custom
Combat stock
red dot sight
Lapco offset sight
Flatline barrel


Posted By: K1LL3R_A-5
Date Posted: 27 October 2005 at 11:25pm

lol no a qloader is way tooo much money, plus it would take away the look of a real gun.  i think i will use a 10-20 round clip that slids in right under the barrel.  i have not desided on the size yet, but i dont not want to make the clip any longer 14 inches.

 

do you guys think that i could finnish this project with out spending major amounts of money?  i want to try and do this for relitively cheap.  if anyone would like to either contribute money, time, or machine skills, please let me know.  contact me at mailto:Farmboystrong@aim.com - Farmboystrong@aim.com

 

in about 1 week or whenever i get some CAD pictures of the 98 itself i will post them.  Then once i get that i will start trying to figure out how to drop it into a stock and make it look like a real gun.



Posted By: cv222005
Date Posted: 28 October 2005 at 12:37pm
mill out the stock your going to use for the body to fit most of the 98, and also cut and mill off the pistol grip of the 98 so that all but a small amount is left that will hide in the stock. leave the trigger alone and have it come out the bottom of the stock like an actual rifle would. run a long hose through a drilled hole in stock for remote line, and up to the connection in front of the trigger of the 98.

-------------

98C
R/T
M4 foregrips W/sightpost
3POS-M4 STOCK
REMOTE


Posted By: aGUYnamedLARRY
Date Posted: 28 October 2005 at 12:41pm
You'd  better know aloooot about all you just said  or you'll end up with a pretty messed up 98...


I thought about trying the clip/forgrip  idea once,  but I have no milling equipment.

GO FOR IT !!


-------------
In a world where everyone has gone mad, only the lunatic is truly sane.


Posted By: K1LL3R_A-5
Date Posted: 28 October 2005 at 4:09pm
if i were to cut the grip off the 98 and drop it into a milled out stock, wouldnt that put the trigger in an odd spot?  im trying to make the gun just as long as a real rifle.  i dont want a sort version, so i would make an electronic trigger for under $25.  then i could rig that up to a real rifle trigger.  then i could just run the wires to the Solinoid and put that were ever it needs to be to fire the gun.  i Just need someone with a bolt action rifle to let me know if there would be enough room to bore it out and put a 20-21 mm 12 gram CO2 in there.


Posted By: ninety8freak
Date Posted: 29 October 2005 at 11:14am

touche...he said sniper!!!



Posted By: K1LL3R_A-5
Date Posted: 29 October 2005 at 7:15pm
if anyone has any kind of bolt action rifle, please could you messure it in Milimeters and tell me if there would be any way to drill it out so a 20-21 mm object could fit inside.  also if anyone has any idea were i could just buy a bolt action set up please let me know.  thanks josh.


Posted By: vonfeldt7
Date Posted: 29 October 2005 at 8:38pm

my dad owns his own shop and works with metal all the time....just thought i would let you know, also my friend had an idea like this once....never went through with it though...(he has a TON of ideas 4 paintball....but in my opinion, most of them are too complex/expensive, i guess if you had money you could use do sum of his ideas.....such as the 1 where you point your gun at the target and it sets the velocity to the correct FPS required 4 shooting "x" distance)



-------------
http://www.freewebs.com/paintball_things - novice paintball help (If you own a tippy and your new to paintball, this site may help)
Jesus is my friend
DO NOT say"sniper"here!


Posted By: K1LL3R_A-5
Date Posted: 30 October 2005 at 3:13pm

how much would your dd charge me per hour?  will he do stuff cheap?  i want to try and get a proto type made.  then i can see if i will be able to make more for a low price

 



Posted By: c411m3b0b
Date Posted: 30 October 2005 at 6:00pm
it will be cool if you can pull it off

-------------
i hate people


Posted By: cv222005
Date Posted: 01 November 2005 at 9:37am

if you did as i described. cut the 98 pistol grip down to size to fit stock. Do not alter the trigger, if you mill out the stock right you should be able to drop the 98 in so that the trigger comes in the right spot. and as for running a hose through the stock you can use macro line to go up to the air fitting in front of the trigger and a air fitting in the rear of the stock. not that hard to do. if you dont under stand that maybe some one else could try to explaine that better for you. touchee that



-------------

98C
R/T
M4 foregrips W/sightpost
3POS-M4 STOCK
REMOTE


Posted By: cv222005
Date Posted: 11 November 2005 at 10:28am

this is baisicly what i was trying to describe. sort of a rough drawing.

 

 



-------------

98C
R/T
M4 foregrips W/sightpost
3POS-M4 STOCK
REMOTE


Posted By: Snake6
Date Posted: 11 November 2005 at 10:36am

you would not be able to mill out the rifle bolt, because it is not a single piece design, it is multiple parts with the firing pin assembly.

It would be easier to run a gas line to the valve through the stock to a 12g quick changer.

As for doing this for only a little money, do you realize how much a Composite Rifle Stock costs?



-------------


Posted By: Dave09
Date Posted: 12 November 2005 at 4:14pm
Originally posted by Snake6 Snake6 wrote:

As for doing this for only a little money, do you realize how much a Composite Rifle Stock costs?




ebay

-------------
tippmann 98 custom
lapco bighsot 14 in
ricochet apache
dye invision
coming soon:
WGP 05 prostock


Posted By: wolf2jester
Date Posted: 12 November 2005 at 5:59pm

it an A5 but is this what you ment

http://opszone.invisionzone.com/index.php?act=Attach&type=post&id=2067 - http://opszone.invisionzone.com/index.php?act=Attach&typ e=post&id=2067



Posted By: Predator88
Date Posted: 13 November 2005 at 1:35am
looks awesome if you could do that i would be amazed

-------------
http://www.specialopspaintball.com/brigade/member_view.asp?id=17667">



Posted By: K1LL3R_A-5
Date Posted: 06 December 2005 at 9:07pm
that rifle posted is what i was thinking.  do you have any info on it?


Posted By: sneaky_sniper
Date Posted: 06 December 2005 at 9:27pm
just so ya know, your gunna need this... http://www.countysports.com/shop/product.php?productid=1780&cat=267&page=2 - http://www.countysports.com/shop/product.php?productid=1780& amp;cat=267&page=2

-------------
[IMG]http://i26.photobucket.com/albums/c128/sneaky_sniper/Invader_Zim.jpg">


Posted By: brihard
Date Posted: 07 December 2005 at 3:42pm
I don't reccommend 12g air. 98Cs eat 12g really fast. Go order one of the small CO2 tanks that RAP markers use, the ones that fit inside and M4 buttstock. It's a reasonable compromise provided you won't shoot to much. A remote line might be even better.

-------------
"Abortion is not "choice" in America. It is forced and the democrats are behind it, with the goal of eugenics at its foundation."

-FreeEnterprise, 21 April 2011.

Yup, he actually said that.


Posted By: Evanh
Date Posted: 09 December 2005 at 2:53am
I would say for an easier mod use a pump of a sort. All inline, mod the fore grip to a bolt in the rear. Just my thought. Pursue what you feel is the best.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net