Gun Maintenace and Repair - Response Trigger!!!!!!!!!!!!

Print Page | Close Window

Response Trigger!!!!!!!!!!!!

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=144215
Printed Date: 19 February 2026 at 9:42pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Response Trigger!!!!!!!!!!!!

Posted By: ViperRap02
Subject: Response Trigger!!!!!!!!!!!!
Date Posted: 30 October 2005 at 1:49am

Please help me I just got a new response Trigger and im trying to put it on my gun but i can't get the gas line off of the valve in the power tube step 6. Please help me the bolt is starting to strip

Replies:

Posted By: Mack
Date Posted: 30 October 2005 at 2:46am

First, and I don't mean to be insulting with this question, did you remove the powertube/valve assembly completely from the right receiver half? If you did, try the following

Make sure you hold the powertube by the body, not the thin neck (I've seen them broken that way)
Experiment with different wrench sizes (since it's starting to strip, a smaller/metric size might fit tighter to prevent further damage)
Be very careful if you have to use an adjustable wrench, they have a tendency to loosen slightly and strip the edges off nuts
If you've never had this piece out before, it will still have the original thread sealant on it which is, in my experience, a bear to break loose-it will require a little bit of force

Good luck

-------------

Posted By: XxTippyballeRxX
Date Posted: 30 October 2005 at 8:11am

call tippmann they can tell u through a step by step process

good luck man

-------------
Tippmann 98 custom
14 inch cp barrel
12 v revy hopper
Pen spring trigger(lol)
3 stage expansion chamber
double trigger
phsycobalasitcs drop
rocket cock 2