SL-68 Trigger Problem
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=144287
Printed Date: 10 March 2026 at 7:07pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: SL-68 Trigger Problem
Posted By: dmikein
Subject: SL-68 Trigger Problem
Date Posted: 31 October 2005 at 1:00pm
|
Hey. I am currently having a problem with my trusty old SL-68 2. Sometimes the trigger has to be squeezed 3-4 times before the marker will fire. A few times the marker has to be "re-pumped" before it can be fired. I never have had this problem before, the marker is about 3 years old and has been cared for. It was last used about 7 months ago, but was cleaned and oiled after use. CO2 is used and the tank was approximately 1/2 full. Any assistance or suggestions will be appreciated. Thanks. ------------- 
|
Replies:
Posted By: Monk
Date Posted: 31 October 2005 at 10:53pm
| Maybe some worn trigger and sear parts? |
Posted By: dmikein
Date Posted: 01 November 2005 at 7:43am
|
Thanks, I thought of that. They look pretty good, don't appear worn, so I am not sure. I will probably live with it and hope it goes away and eventually take it to a "gunsmith". -------------
|
Posted By: tigman250
Date Posted: 02 November 2005 at 8:20pm
|
the sear that catches the front bolt has a roll pin that it pivots on, sometimes it comes halfway (or completly) out wich lets the sear go to high. take it apart and make sure the pin is in it's proper place. this would explain why you have to recock sometimes too.
http://img6.imageshack.us/my.php?image=sl68iiguts2uj.jpg"> found this pic in another thread check the roll pin and make sure the sear pivots smoothly if it has any hangups at all clean the sides with a file ------------- http://img76.imageshack.us/my.php?image=stickemup6of.jpg"> 
|
