Velocity issues
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=144543
Printed Date: 05 October 2024 at 12:53am Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Velocity issues
Posted By: a5rog
Subject: Velocity issues
Date Posted: 05 November 2005 at 2:48pm
Hi. I have an A5 with Palmer Stabilizer and Flatline. Everything else is stock. I keep the FVA flush with the tube.
Last month we played in rain and things got really really wet. When I got home I cleaned and oiled my gun to make sure the internal stuff would not rust.
Yesterday we went to play. I chronoed my gun and could not get it past 240. This was the first time this has ever happened. I have since purchased madman springs and am using the red one. I went to chrono today but I could only get it up to about 250, and that's even with the stabilizer screw almost all the way in. Is there anything else I can do before I start looking at the Palmer.
|
Replies:
Posted By: Millslane
Date Posted: 06 November 2005 at 12:10am
RVA would be a good idea.
this is going to allow you to adjust the velosity more or less by putting more or less tension on the drive spring.
also, you can try adding 1 or 2 bb's in the end cap or RVA. just take
the end cap/RVA off and drop 1 or 2 bb's ino the hole, place the drive
pin back into the hole and put the drive spring over the pin. this will
give more tension to produce more velosity
------------- www.pbteamwow.com
|
|