A5 Flatline
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=145779
Printed Date: 25 February 2026 at 2:18pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: A5 Flatline
Posted By: Warchilde
Subject: A5 Flatline
Date Posted: 29 November 2005 at 9:17pm
Hi,
I have a afiarly new A5 with Tippman x-chamber and a flatline barrel. Here's my problem
1)On the flatline barrel the screw and the sight will not line up
perfectl;y, they are a few millimetres off (not sure if this is within
tolerances)
2) the majority of the paintballs shoot off to the left of the marker,
rarely to the right. 7/10 are to the left of the target (some
spin very far left) ... I don't know why this is happening ... the
barrel is lined up with the sight as best as I can, it won't turn those
extra few milimeters to line up perfectly. If it spread around
the target evenly I wouldn't be to concerned but the grouping left
indicates that perhaps something is wrong.
Any ideas
|
Replies:
Posted By: Millslane
Date Posted: 30 November 2005 at 7:28pm
take the flatline off the A-5 and take the shroud off. look on the
bottom of the barrel (i think its the bottom). theres a white, strait,
center mark going down the barrel. this is the real center mark. this
is supposed to be lined up so that you can use the shroud screw to
align it properly.
good thing that this is adjustable. there a hole with a allen small
allen screw on the barrel adapter, unscrew this and adjust it to the
the barrel is strait. then tighten is back down.
i don't know how to tell if its strait, just keep trying, it will work.
good luck
-------------
www.pbteamwow.com
|
|