Gun Maintenace and Repair - Pro E not fireing

Print Page | Close Window

Pro E not fireing

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=146442
Printed Date: 12 January 2026 at 12:46am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Pro E not fireing

Posted By: Lewd_Crowbar
Subject: Pro E not fireing
Date Posted: 12 December 2005 at 2:10am

like the tittle says its not firing i think this is due to the solenoid not having enough force to disengage the sear from the hammer( i can hear it move but the marker dosent fire. ive also seen it move when the marker is disassembled) any ideas on why this might be?

for reference ive looked at the armature pin and there isnt any real mushrooming out. ive also changed the battery's so its not that either

my marker is still on warranty though so if some one would tell me how i might just send it in to tippmann

Replies:

Posted By: CUSTOMPROe#1
Date Posted: 12 December 2005 at 3:05am

Inspect your magnet under the solenoid and make sure its not cracked. Make sure its pulling the solenoid back every time.

-------------
Custom Pro E
Cyclone feed
4500 HPA w/Guerrilla reg

Posted By: Lewd_Crowbar
Date Posted: 12 December 2005 at 6:15pm

thnx but the magnet is still in one peace.

also if anything the solenoid is being held down to hard. as it moves up
alittle bit but fails to tip the sear.