Print Page | Close Window

double fire gun

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=146492
Printed Date: 22 May 2026 at 1:09am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: double fire gun
Posted By: chikin pickle
Subject: double fire gun
Date Posted: 12 December 2005 at 11:13pm
I went to the paintball field this saturday and my gun would not stop double firing. I spent all morning trying to figure out why it was doing this. then I changed my co2 tank. this helped and the gun worked finr for the rest of the day. then when I got home I was trying to figure out what was wrong with it and dry fired with both tanks. My gun started doing double and triple fires before it would properly recock. I know its not my tank because it was doing this with both tanks. I suspect it might be the hammer but not sure. The sear cath slot on the hammer has a ridge on the top and is at about a 60 degree angle. I have already tried tightening my power tube and oiling my ASA. I would also like tonote that my gun is practically brand new with only about 2000 rounds through it.

-------------
you know your screwed when your buddy turns to you in the middle of a firefight and says oops



Replies:
Posted By: Bruce A. Frank
Date Posted: 13 December 2005 at 2:54am
Originally posted by chikin pickle chikin pickle wrote:

I went to the paintball field this saturday and my gun would not stop double firing. I spent all morning trying to figure out why it was doing this. then I changed my co2 tank. this helped and the gun worked finr for the rest of the day. then when I got home I was trying to figure out what was wrong with it and dry fired with both tanks. My gun started doing double and triple fires before it would properly recock. I know its not my tank because it was doing this with both tanks. I suspect it might be the hammer but not sure. The sear cath slot on the hammer has a ridge on the top and is at about a 60 degree angle. I have already tried tightening my power tube and oiling my ASA. I would also like tonote that my gun is practically brand new with only about 2000 rounds through it.
Make sure the "O" ring on the hammer (rear bolt) is oiled. The sear spring may need to be a bit tighter.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net