Hinged Barrel
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Paintball Ideas / News From Tippmann
Forum Description: Got a new idea or a way to improve something?
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=146780
Printed Date: 22 December 2024 at 2:44pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Hinged Barrel
Posted By: >><<
Subject: Hinged Barrel
Date Posted: 18 December 2005 at 7:49pm
|
I was thinkin about this. OK we all know when we have a barrel break the next balls you shoot go everywhere and that really hurts your accuracy and your waistin balls really. But ok a hinge about an inch into the barrel and swings down when you press the button that is located at the top or bottom of the barrel and the barrel swings down allowing you to ram a squeegee of your choice in there and then popping the barrel back into placeand your back in action. This whole action could take as little as 10 seconds if you use a staright squeegee just ram it in take it out pop the barrel and your done clean barrel and all. You would have to make sure the barrel makes a good fit when you put back in place so it doesn't screw up anything. ------------- 
|
Replies:
Posted By: brihard
Date Posted: 18 December 2005 at 8:18pm
|
No. Just unscrew the barrel. A hinge would create irregularities in the barrel that would be bad for accuracy. ------------- "Abortion is not "choice" in America. It is forced and the democrats are behind it, with the goal of eugenics at its foundation." -FreeEnterprise, 21 April 2011. Yup, he actually said that. |
Posted By: >><<
Date Posted: 18 December 2005 at 8:36pm
|
and in a speedball game you don't have time to uncrew your barrel. -------------
|
brihard wrote:Posted By: TruePaintballer
Date Posted: 19 December 2005 at 12:05am
|
it has potential...would take a lot of work tho ------------- http://www.freewebs.com/outlawspaintball/index.htm - Outlaws *Sponsors* http://www.abrika.ca - Abrika |
Posted By: WGP guy2
Date Posted: 19 December 2005 at 6:39pm
Thats not so easy when you have cocker threads, its 8.5 turns and you have the pnue host pushing the barrel making it worse. |
Posted By: Monk
Date Posted: 19 December 2005 at 6:41pm
| I think Id rather have a hinged feedneck. But thats still cool. |
Posted By: Tiger Stripe
Date Posted: 19 December 2005 at 7:43pm
|
*first post* cool idea but i think unscrewing the barrel would be much easyer lee ------------- <<Sig much too large>> |
Posted By: UV Halo
Date Posted: 23 December 2005 at 2:42pm
|
A hinge in the barrel would introduce a seam that could negatively impact accuracy. Barrel sleaves and such work because they can be designed concentric. A hinged connection cannot operate off a simple hinge. You'd need a hinge more like a car door (two pins), and the tolerances would need to be too tight to make it work.
However, you could hinge the body (think like the early Line SI semi-autos) since the paintball would not touch the body, and you don't need to worry as much about a seam line. That way, you could leave the barrel in place, and still be able to swap out barrels. ------------- M98C- W/QwkStrpCut Comp Air & Palmer Fatty Stab Gas-Thru Stock Lapco Sight Rail W/ADCO 30MM EDOT Qloader W/ CMS Freak SS W/Stif-Tip * Flatline * Armson Stealth |
Posted By: Styro Folme
Date Posted: 23 December 2005 at 11:11pm
|
i think it's a great idea. would be difficult to do, but it would pay off. ------------- X |
Posted By: merc
Date Posted: 24 December 2005 at 4:58pm
|
sheridan jackel has a hinged barrel. they just use a taper to make sure its not off. ------------- saving the world, one warship at a time. |
Posted By: The Guy
Date Posted: 25 December 2005 at 2:56am
did you ever wonder why a straight shot has the springy part? Press down on the swap end, shove the rubber end down you barrel, release and pull out. ------------- http://www.anomationanodizing.com - My Site 
|
Posted By: >><<
Date Posted: 25 December 2005 at 8:03am
I don't have a straight shot squeegee or seen one so i don't what your talkin about. Actually i have seen on but i don't remember a springy thing. -------------
|
Posted By: The Guy
Date Posted: 25 December 2005 at 9:55pm
|
but anyway, youd be better off if the hinger was actually built into the gun.
------------- http://www.anomationanodizing.com - My Site
|
Posted By: sneaky_sniper
Date Posted: 25 December 2005 at 10:10pm
|
i want a bolt action pb gun but it aint gunna happen... im not really sure what this has to do with it, but o well... ------------- [IMG]http://i26.photobucket.com/albums/c128/sneaky_sniper/Invader_Zim.jpg"> |
Posted By: Mr. Spiffy
Date Posted: 26 December 2005 at 2:36pm
Why not make a barrel adaptor that has the hinge? You can screw it into the gun and the barrel into the adaptor. The adaptor has hinges that allow the barrel to swing out from the marker for quick cleaning. No mods needed for the marker or the barrel  . ------------- Missing: 2nd star and 960+ posts to my name. -Another victim of the system. |
Posted By: sneaky_sniper
Date Posted: 26 December 2005 at 3:09pm
|
i like it...and you can undo it without any paintballs falling out because the hinge is past the ball latchy thing ------------- [IMG]http://i26.photobucket.com/albums/c128/sneaky_sniper/Invader_Zim.jpg"> |
Posted By: curby972
Date Posted: 26 December 2005 at 11:50pm
| i think the hinged barrel could work just have some oring in there some where to keep it connected good to the other piece and so it keeps a good seal. |
Posted By: Da dude
Date Posted: 27 December 2005 at 4:05pm
|
all u got to do is w8 till its invented and buy it
><> go fish ------------- 98c dye sticky grips 16'' j&j barrel |
Posted By: BearClaw
Date Posted: 27 December 2005 at 5:36pm
|
Dang good idea one of the few in this section of the forum LOL. The Carbines alow the whole fron grip to move forward so use of a wire squegy can be used through the breach similare to the 98c but this takes alot more than a break away might take. Wish i still had my gramps olds Savage 94 12 gauge single shot gun to see how it worked with the break away. ------------- AGD 68 Automag Azodin KPII Sheridan PGP2K Tippmann Crossover XVR Tippmann ProCarbine Tippmann SL68-II Tippmann TiPX |
Posted By: >><<
Date Posted: 28 December 2005 at 10:07pm
|
If i had any idea on how to make this i would cause i think alot of people would buy and it'd help alot. Maybe this will be my first patent?? -------------
|
Posted By: sneaky_sniper
Date Posted: 28 December 2005 at 10:26pm
|
i doubt a freakisly large number of people would buy it, but you could probly get some cash off of it, and if i have time later i'll draw up some plans on intellacad ------------- [IMG]http://i26.photobucket.com/albums/c128/sneaky_sniper/Invader_Zim.jpg"> |
Posted By: sneaky_sniper
Date Posted: 29 December 2005 at 6:13am
its not all that great but i just made it and its  5:11 in the morning, i never went to bed... ah well... *falls over dead*  ------------- [IMG]http://i26.photobucket.com/albums/c128/sneaky_sniper/Invader_Zim.jpg"> |
Posted By: >><<
Date Posted: 29 December 2005 at 4:12pm
|
you must have been extremly bored to do this but thanks i may have to start work on this pretty soon. -------------
|
Posted By: sneaky_sniper
Date Posted: 29 December 2005 at 5:35pm
------------- [IMG]http://i26.photobucket.com/albums/c128/sneaky_sniper/Invader_Zim.jpg"> |
Posted By: MVM91
Date Posted: 17 January 2006 at 6:58pm
| if it had just as much accuracy and worked id love it...then again instead of spending that money on a hindged barrel you could buy a straight shot squeegee for a lot less |
Posted By: __sneaky__
Date Posted: 17 January 2006 at 7:17pm
------------- "I AM a crossdresser." -Reb Cpl Forum Vice President RIP T&O Forum |