E-grip Problems
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=147037
Printed Date: 12 December 2025 at 12:08pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: E-grip Problems
Posted By: jesus freak
Subject: E-grip Problems
Date Posted: 23 December 2005 at 1:26pm
|
Well . . . I just got a whole bunch of new parts for my gun, a stabilizer, an e-grip and JCs duel trigger, a unimount and such. Well, I have had those parts installed for a long time without testing them, so I finally got air and gassed up my gun and started to fire . . . After about three shots in semi I hear a faint little clicking when it should be dry firing. I pulled off my e-grip and put on my stock grip and there were no problems. I am thinking I should put in anew battery but any help would be appreciated. |
Replies:
Posted By: fishsticks
Date Posted: 23 December 2005 at 4:07pm
|
try a new battery. ------------- A gun is not a weapon... It's a tool. Like a butcher knife, or a harpoon, or...uh, a...an alligator. |
Posted By: Bango
Date Posted: 23 December 2005 at 8:21pm
| Same thing happened to me. Still haven't fixed it yet. I hate electronics. |
Posted By: jesus freak
Date Posted: 24 December 2005 at 2:15pm
|
Well I suppose I'll try a new battery when I get more air. I don't know, its so frustrating. |
Posted By: evillepaintball
Date Posted: 28 December 2005 at 2:52am
| take the trigger assembly out of your egrip, open it up and look at the sear. does it have an oval hole or a circular one? |
Posted By: jesus freak
Date Posted: 03 January 2006 at 7:44pm
sorry to bump this but oval |
evillepaintball wrote:Posted By: drummerboy123
Date Posted: 03 January 2006 at 8:31pm
|
well some kid that was playin with us also had some egrip problems like
it was going on abd off when it was in tubo mode. and it wasnt the
battery thou
------------- A-5: -E-GripW/JCS -BSA30mm -J&J Ceramic 14" -JCS POWERTUBE"GM" -JCS VooDoo W/RVA -StarFire Bolt -Polished Internals 
|
Posted By: Bango
Date Posted: 03 January 2006 at 11:26pm
Tippmann has new ones that are circular, you'll have to order the newer one. ------------- http://imageshack.us"> 
|
Posted By: bullseye9
Date Posted: 04 January 2006 at 12:10am
|
call tippmann
------------- Tippmann A-5 E-Grip JCS DUAL Trigger 14" J&J ceramic 68/4500 bullet drop macro line polished internals LPK The damage done to a man should be such that there is no fear of revenge!!! |
Posted By: jesus freak
Date Posted: 04 January 2006 at 7:21pm
| I have a circular one and I am still having troubles. |
Posted By: Bango
Date Posted: 05 January 2006 at 5:24pm
|
Take out the armature pin, the thing that hits the sear, and look at the top of it and see if it mushroomed a little. You might have the old pin that isn't as strong. Tippmann has a new reenforced one.
------------- http://imageshack.us">
|
Posted By: evillepaintball
Date Posted: 12 January 2006 at 10:27pm
i have the oval one, and put a piece of a q-tip shaft in there to stop it from moving, and its worked fine ever since. |
Posted By: Tippmann M16
Date Posted: 16 February 2010 at 10:03pm
| I just had the same problem so i took out the trigger and slit the grip and took a pencil eraser and right where the magnets meet on the computer itself right at the top take your eraser ans put it on those recievers to clean them... after i did that it worked fine...let me kno if it doesnt work or u cant understand wat i am saying |