unexplained 98c problems
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=147045
Printed Date: 21 November 2025 at 3:27pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: unexplained 98c problems
Posted By: mat10590
Subject: unexplained 98c problems
Date Posted: 23 December 2005 at 5:17pm
|
i have i 98c with a payload of mods including super r/t cyclone and many more but more often then not the gun will fail to recock. iv already ruled out low/emty co2 with multiple full tanks. it came with a "140 low pressure orphace" its alittle bigger than the inner diameter of the hose and has an inner diameter of about the size of the stock hose and i think it might go inside the low pressure hose but i dont know. if its not that it mght be my rear velocty adjuster please give me a few trouble shooting suggestions ------------- http://www.sloganizer.net/en/ - [IMG - http://www.sloganizer.net/en/style1,Mat10590.png - i do everthing full auto.....yes that includes stealthy |
Replies:
Posted By: rossy11223
Date Posted: 23 December 2005 at 5:24pm
| I did not understand a word you just said. |
Posted By: Bango
Date Posted: 23 December 2005 at 8:20pm
Explain what that is first then we'll be able to answer the question. |
mat10590 wrote:Posted By: mat10590
Date Posted: 24 December 2005 at 8:54am
|
it is an aluminum cylinder about an1/8 in tall and a 1/16 wide with a tiny hole drilled through it the hole is about the size of the inner diameter of the stock hose. trust me im as confused as you are ------------- http://www.sloganizer.net/en/ - [IMG - http://www.sloganizer.net/en/style1,Mat10590.png - i do everthing full auto.....yes that includes stealthy |
Posted By: Snake6
Date Posted: 24 December 2005 at 9:56am
|
Check your Rear Bolt O-Ring, and your sear.
------------- 
|
Posted By: mat10590
Date Posted: 07 January 2006 at 2:50pm
|
ok i looked at the trigger mechanism close and realized i was missing the little pin above the part of the sear near the trigger would that be it? ------------- http://www.sloganizer.net/en/ - [IMG - http://www.sloganizer.net/en/style1,Mat10590.png - i do everthing full auto.....yes that includes stealthy |
Posted By: Snake6
Date Posted: 07 January 2006 at 2:57pm
|
What pin are you refering to? Pictures?
-------------
|
Posted By: Tippyprouser
Date Posted: 07 January 2006 at 6:24pm
|
it doesn't matter what pin it is, if there isn't one there you still need to replace it. and that may be it ------------- Setup: Tippmann Custom Pro E-trigger 12" All American BT Folding Stock GTA Inline Expansion Chamber Kit Dead on Pro seal Cyclone Feed System Remote Line Polished internals |
Posted By: mat10590
Date Posted: 07 January 2006 at 7:04pm
|
its been replaced but im out of co2 so i dont know if that was the problem btw im not a noob if thats wat your thinking ive played for five years i can just be realy dense somtimes ------------- http://www.sloganizer.net/en/ - [IMG - http://www.sloganizer.net/en/style1,Mat10590.png - i do everthing full auto.....yes that includes stealthy |
Posted By: monty_sniper
Date Posted: 08 January 2006 at 8:31pm
------------- 98% of ion owners think ions are better than any high end gun. If you would like to bonus ball these idiots put this in your sig. Proud owner of 3 guns and counting. |