Print Page | Close Window

A-5 with New Upgrades

Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Marker Gallery
Forum Description: Show us your guns!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=147245
Printed Date: 09 April 2026 at 8:12pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: A-5 with New Upgrades
Posted By: m98AHA
Subject: A-5 with New Upgrades
Date Posted: 27 December 2005 at 12:42pm

This is the before Christmas gun:

After Christmas:

The Upgrades include: E-grip, Low pressure Kit, Aluminum Power tube, Custom Products Shorty Reg, R-5 hopper, Shocktech A-5 Adapter w/ Shocktech Long Drop and Smart Parts on/off Valve.

Its not quite done as I hope you can tell.  A black to blue fade is to come.  The barrel tip will be painted a matching blue.  I am going to get the WAS board with an Eclipse DART QEV and a JCS Dual Trigger (even though the current trigger pull is 4-5 mm with set screws).  I will also probably get the A-5 to M98 barrel adapter and replace the adapter that is on it right now so I can use my Pipe kit with this gun.  I would probably get a new back for the Boomstick so I can use it on both guns.

Tell me what you think, keep in mind the future upgrades.

Thanks and enjoy.



-------------
98 Custom w/words and rear site milled off
Blow-back gas slits
polished internals
Aluminum Powertube
Starfire bolt
Evil Pipe Kit
Evolution II
LPK w/ Vigilante reg
Double Tigger w/trigger job



Replies:
Posted By: Bushyboy0404
Date Posted: 27 December 2005 at 12:51pm
thats pretty sweet make sure u put pics up when u get the paintjob

-------------
02 cocker-sold
ion
max flo
progressive
clamping feedneck
47/3k tank
revvy


Posted By: devil-fire
Date Posted: 27 December 2005 at 12:55pm

yea your gun has change marvelesly.  thats awesome! post pics after ur paintjob.



-------------
98% of paintballers act gangsta', if you are of the 2% that are normal, put this this in your sig.


Posted By: ANARCHY_SCOUT
Date Posted: 27 December 2005 at 1:18pm
Very nice Ive been thinkin about getting an A-5 I think after seeing your it will be on my to-do  list.

-------------
Gamertag: Kataklysm999


Posted By: A5Gunner24
Date Posted: 27 December 2005 at 1:31pm
Whoo nice looking change of your previous A5.  It looks great!


Posted By: pbdude985
Date Posted: 27 December 2005 at 1:40pm
swett looking A5 dude , deffitnly post pics when you are done.

-------------


Posted By: SuzukiRider987
Date Posted: 27 December 2005 at 2:32pm
Very nice.

-------------
    http://www.macdev.net - MacDev Militia
    http://www.alienpb.com - Alien - Because winning is more fun.


Posted By: Sureshot3091
Date Posted: 27 December 2005 at 2:47pm
Nice...Can't wait for the paint job

-------------
http://img329.imageshack.us/my.php?image=picture0020xo.jpg">
My new baby :-P


Stiffy2008 said, "wat is a noob?"


Posted By: warbeak2099
Date Posted: 27 December 2005 at 3:30pm
I would get HPA before you buy anything else. Co2 is gonna kill that CP reg real fast. It was not designed for use w/ co2. WAS, paintjob, and trigger should come after.

-------------
MIDN 2/C, US Navy

LCE-SpyderMag | G-Force Pneumatic Mag | '99 RF Sniper II


Posted By: paintbusta
Date Posted: 27 December 2005 at 3:48pm

nice upgrades

 



-------------


Posted By: Sureshot3091
Date Posted: 27 December 2005 at 4:18pm
Originally posted by warbeak2099 warbeak2099 wrote:

I would get HPA before you buy anything else. Co2 is gonna kill that CP reg real fast. It was not designed for use w/ co2. WAS, paintjob, and trigger should come after.


He does have a point


-------------
http://img329.imageshack.us/my.php?image=picture0020xo.jpg">
My new baby :-P


Stiffy2008 said, "wat is a noob?"


Posted By: m98AHA
Date Posted: 27 December 2005 at 8:45pm

I did a little bit of research on the topic of the CP reg.  I talked to a couple of different techs from both Shocktech and CP about their reg (they are the same thing).  Both said that the reg would work fine with CO2 just as long as I didn't do anything to allow for liquid CO2 into the gun (ie. point the gun toward the ground and fire).  That is why I went ahead with the CP reg, but I am planning on getting a nitrogen tank, probably the new Smart Part Micro reg.  I know many of yall don't like SP but I like the new reg.  If you haven't seen it, it is a preset reg on a dovetail mount with built in on/off.  So I don't have to deal with the whole screw in tank valve adding an inch or two to the length of my setup.  It looks nice too and since it will be running through either my CP or Vigilante regs, I don't have to worry about consistency so much. 

Thanks for the comments, and I should have all of the other upgrades by the end of the school year (May) or middle of the summer.  I will probably get the paint job and nitrogen tank first, then for my birthday get the WAS board and JCS trigger (August).



-------------
98 Custom w/words and rear site milled off
Blow-back gas slits
polished internals
Aluminum Powertube
Starfire bolt
Evil Pipe Kit
Evolution II
LPK w/ Vigilante reg
Double Tigger w/trigger job


Posted By: greyalien
Date Posted: 27 December 2005 at 11:48pm
An anti-siphon CO2 tank would be worth investing in.

-------------
-ws


Posted By: ritzblitz
Date Posted: 28 December 2005 at 1:39pm
Needs nitrogen.

-------------


Posted By: andrewc
Date Posted: 02 January 2006 at 7:36pm
u gotta love santa



^^^dont think i believe in him


Posted By: Styro Folme
Date Posted: 02 January 2006 at 9:12pm

get nitro before anything else.  seriusly.  other than that, it's pretty sweet. 



-------------
X


Posted By: yesr
Date Posted: 03 January 2006 at 4:47pm
nice good 1 man


Posted By: Autococker/A5
Date Posted: 03 January 2006 at 10:53pm
why do people paint ove rhte tippmann thing it looks sooo dumb


Posted By: Deyo
Date Posted: 03 January 2006 at 10:59pm
Originally posted by m98AHA m98AHA wrote:

This is the before Christmas gun:

After Christmas:

The Upgrades include: E-grip, Low pressure Kit, Aluminum Power tube, Custom Products Shorty Reg, R-5 hopper, Shocktech A-5 Adapter w/ Shocktech Long Drop and Smart Parts on/off Valve.

Its not quite done as I hope you can tell.  A black to blue fade is to come.  The barrel tip will be painted a matching blue.  I am going to get the WAS board with an Eclipse DART QEV and a JCS Dual Trigger (even though the current trigger pull is 4-5 mm with set screws).  I will also probably get the A-5 to M98 barrel adapter and replace the adapter that is on it right now so I can use my Pipe kit with this gun.  I would probably get a new back for the Boomstick so I can use it on both guns.

Tell me what you think, keep in mind the future upgrades.

Thanks and enjoy.



-------------
DevilsPaintbrush.com


Posted By: Deyo
Date Posted: 03 January 2006 at 11:01pm
pretty  sweet.  check  out  our  a 5 s. devils paintbrush.com

-------------
DevilsPaintbrush.com


Posted By: m98AHA
Date Posted: 06 January 2006 at 3:03pm

Originally posted by Autococker/A5 Autococker/A5 wrote:

why do people paint ove rhte tippmann thing it looks sooo dumb

What are you talking about?!  Nothing has been painted over.  I removed the cheap little Tippmann A-5 sticker that was on the side and smoothed it out, but other than that, nothing Tippmann was paintball over.  On the A-5, to powdercoat it, you would have to remove the Tippmann A-5 sticker in order to powdercoat it.



-------------
98 Custom w/words and rear site milled off
Blow-back gas slits
polished internals
Aluminum Powertube
Starfire bolt
Evil Pipe Kit
Evolution II
LPK w/ Vigilante reg
Double Tigger w/trigger job



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net