Print Page | Close Window

What does a bigger barrel do?

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=148159
Printed Date: 26 February 2026 at 2:33am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: What does a bigger barrel do?
Posted By: parkg95
Subject: What does a bigger barrel do?
Date Posted: 09 January 2006 at 7:39pm

Is a 12 inch barrel going to be less acurate than a 14 inch barrel or is the 14 inch barrel just going to waste gas...I dont get the point of longer barrels besides that they're bigger...

Also, what can I use to make my CO2 more consistent?




Replies:
Posted By: P8ntBall3r
Date Posted: 09 January 2006 at 7:40pm
Longer barrels are quiter for the most part. A 12 in. is my favorite. Its just as accurate as a 14 or a 16 but you can get closer to the bunker.

-------------
Setup:
Marke:98 custom pro
Custop Products Flame drop
Barrel:12" SP Progressive
Hopper: Vieloader evolution II
98%of paintballers act gangsta if you are the 2%that are normal put this in your sig


Posted By: rossy11223
Date Posted: 09 January 2006 at 7:41pm
Longer barrels aren't necessarily more accurate, some people just like the feel of them. You aren't going to see any difference in a 12 and 14 inch barrel and yes, it would probably just waste gas.


Posted By: pbdude985
Date Posted: 09 January 2006 at 8:09pm
most barrels 14inches and under have similar performce due to lenth, anything going over 16 inches is a waste becuase it takes more air to power the ball out which takes more air.  And a longer barrel will not add distance so dont think a 21inch barrel will make u a "sniper"

-------------


Posted By: drummerboy123
Date Posted: 09 January 2006 at 8:56pm
well you could actually get alot of things maby even a stabilizer or hpi or alot of stuff.

-------------
A-5:
-E-GripW/JCS
-BSA30mm
-J&J Ceramic 14"
-JCS POWERTUBE"GM"
-JCS VooDoo W/RVA
-StarFire Bolt
-Polished Internals


Posted By: warbeak2099
Date Posted: 09 January 2006 at 9:34pm
Longer barrels are good for poking through brush in woods play or leaning against bunkers on an airball field. Yes, anything past 16" will decrease performance. A good quality barrel between 8 and 16" will shoot the same. If the 14" version of the barrel you're looking at has more porting than the 12", then it will be quieter. I think 14" is the perfect size. I play on a field with air bunkers and I even use my 14" front when playing the snake.

-------------
MIDN 2/C, US Navy

LCE-SpyderMag | G-Force Pneumatic Mag | '99 RF Sniper II


Posted By: Daron
Date Posted: 10 January 2006 at 7:10am

I like the 14" size.. But as said.. longer barrels dont mean more range/accurasy.. But, a barrel in the 12"-16" range is preffered by most people because its ok for both maneuvering it around(longer barrels are harder swinging around in the bushes) and to clear covers when firing..

A side note.. Most people thinks that a longer barrel makes you use more gas/air.. But the tippman markers use the same amount of air no matter how you adjust the velocity screw.. The screw just decrease/increase the turbulence in the air flow, making it more or less effective..

And if you want to make co2 more consistent, try a palmer stabilizer.. 

 



Posted By: Bruce A. Frank
Date Posted: 10 January 2006 at 12:41pm
Originally posted by Daron Daron wrote:

I like the 14" size.. But as said.. longer barrels dont mean more range/accurasy.. But, a barrel in the 12"-16" range is preffered by most people because its ok for both maneuvering it around(longer barrels are harder swinging around in the bushes) and to clear covers when firing..

A side note.. Most people thinks that a longer barrel makes you use more gas/air.. But the tippman markers use the same amount of air no matter how you adjust the velocity screw.. The screw just decrease/increase the turbulence in the air flow, making it more or less effective..

And if you want to make co2 more consistent, try a palmer stabilizer..

Just to add a bit to Daron's post. I don't understand where this idea arose that a longer barrel uses more gas! The ball is accelerated to velocity in the first 6 to 8 inches of barrel. That is part of the reason you usually see no porting on barrels until that point. After that the ball is coasting. Even with close matches of paint diameter to bore diameter there is virtually none to ever so slight contact of the ball to bore. Drag in the bore, excessive contact of the ball to the bore, doesn't slow the ball but imparts undesirable spin...a much more detrimental condition than a few feet per second less velocity. If your paint isn't curving then it is not likely that there is any detrimental bore contact...no matter how long the barrel.

Unlike a firearm with an excessively long barrel, the extended length of a paintball marker barrel does not cause drag or friction to slow the velocity.

What a longer barrel will do for you is allow you to reduce your exposure by leaning it into the bunker or, as someone else here said, stick it through the brush to better fire undetected. I also can help with instinctive aiming as the longer barrel becomes easier to point.

The longer barrel is usually more quiet. Longer barrels with many small porting holes after that first 6" to 8" acceleration section provide the lowest levels of firing noise.




Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net