I cant fix my gun!!!!
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=148385
Printed Date: 23 January 2026 at 3:59pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: I cant fix my gun!!!!
Posted By: XxCS2xX
Subject: I cant fix my gun!!!!
Date Posted: 13 January 2006 at 9:50pm
|
Ive done everything I replaced all the guns orings I got to valve screws I polished my internals I oiled everything and my dam gun wont recock itself!!!!!!!!!!!!!!!!!!!!! Someone help me!!! I have an tippmann expansion chamber thats the only add on i got so far ------------- Tippmann M98 Halo B 32 deg. Stock Tippmann Xpansionon chamber Polished Internals |
Replies:
Posted By: Snake6
Date Posted: 13 January 2006 at 9:59pm
|
When its gassed up, and you fire does it give you the "full-auto" sound? If so, check the Sear for wear. ------------- 
|
Posted By: XxCS2xX
Date Posted: 13 January 2006 at 11:42pm
|
no it doesnt im positive its not the c02 and all the bolts springs and everything is brand new ------------- Tippmann M98 Halo B 32 deg. Stock Tippmann Xpansionon chamber Polished Internals |
Posted By: Mehs
Date Posted: 14 January 2006 at 1:16am
|
It's pretty obvious you put it together incorrectly if it won't recock. Open it up, and ask yourself, why won't it recock, and look at everything that has to do with the bolt getting cocked back. By the sounds of it, you could've put your sear on incorrectly, or you're missing a pin.
------------- [IMG]http://i27.tinypic.com/1538fbc.jpg"> Squeeze Box ☣ |
Posted By: cus98tom
Date Posted: 14 January 2006 at 7:54am
| Look at the ball latch, it may be in backwards. |
Posted By: Monk
Date Posted: 14 January 2006 at 12:10pm
|
Wont recock, and doesnt go auto.(Or even a BRTBRTBRTBrtbrtbrt.)? Personaly that sounds like no air in the tank. |
Posted By: spudcrazy
Date Posted: 14 January 2006 at 12:16pm
|
I believe it's possible to put the rear bolt in upside down. That would mean that the catch is on the top side, rather than the bottom side, therefore nothing for the sear to latch to. Could this be your problem? Or, you could have the sear in backwards. If that were the case, you'd also have no where to put the sear spring. I'm grasping at straws here. It does sound like a tank fill problem, though. The tippys are pretty destruction proof. Oh, it could also be the front bolt is in backwards. I've definitely done that before, with the exact same results you're having. No BRRP, and no recock, but full tank. ------------- http://www.thelloydsonline.com/paintball - SPUDCRAZY http://www.oldmanmilitia.com"> 
|
Posted By: Mack
Date Posted: 14 January 2006 at 12:50pm
|
You could also try removing the stock and replacing it with the
original end cap on the off chance that it is interfering with the
recocking. P.S. Can you cock it manually? ------------- 
|
Posted By: eliminator
Date Posted: 14 January 2006 at 1:57pm
|
Bring it to the shop you bout it at. They will fix it! ------------- __||__ [ }------ =() =() //' || R THOSE MY BALLS ON UR FACE |
Posted By: XxCS2xX
Date Posted: 14 January 2006 at 2:19pm
|
I figured out the problem the expansion chamber couldnt get air through it when i blew into it the holes were no lined properly causding no air to get through. ------------- Tippmann M98 Halo B 32 deg. Stock Tippmann Xpansionon chamber Polished Internals |
Posted By: Monk
Date Posted: 14 January 2006 at 2:30pm
| HUZZAH!!! |
Posted By: evillepaintball
Date Posted: 14 January 2006 at 6:19pm
then you lied, you can fix your gun... |
XxCS2xX wrote:Posted By: tecumseh
Date Posted: 15 January 2006 at 6:30pm
|
lol, but good luck with it ------------- what? |
Posted By: Bruce A. Frank
Date Posted: 16 January 2006 at 3:38am
Though the marker has been fixed I though this needed a comment. If you turn the rear bolt (hammer) up side down it would be as you said...no sear engagement notch. BUT, there is also no hole into which the actuation rod would fit, so the marker could not be reassembled and if somehow it could be put together with no rod engagement in the rear bolt the front bolt couldn't move. |
Posted By: spudcrazy
Date Posted: 16 January 2006 at 10:46am
^^^^Forgot about the acutation rod hole....Okay I feel stupid now. . But I was just thinking of the cuff. Thanks for the correction, though. "I learn something new everyday." ------------- http://www.thelloydsonline.com/paintball - SPUDCRAZY http://www.oldmanmilitia.com">
|
Posted By: Tippyprouser
Date Posted: 17 January 2006 at 1:10pm
|
also that, if he had it upside down, so the bolt didn't have that ledge
to snap on, it wouldn't even cock back when he did it manually. ------------- Setup: Tippmann Custom Pro E-trigger 12" All American BT Folding Stock GTA Inline Expansion Chamber Kit Dead on Pro seal Cyclone Feed System Remote Line Polished internals |
Posted By: Bruce A. Frank
Date Posted: 17 January 2006 at 3:16pm
|
That is what he said. During the process of trying to improve the trigger pull with the original rear bolt I was altering the sear engagement notch. Over time I essentially wore out the original slot. I turned the rear bolt over and cut a new sear engagement slot. I also had to drill a new hole for the actuation rod. Worked, saved my having to buy a new rear bolt on which to experiment. |
Posted By: Monk
Date Posted: 17 January 2006 at 4:31pm
| Unless the person forgot to put the linkage arm in the gun at all. Then you could put in in upside down. |