Print Page | Close Window

C3 problems

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=148712
Printed Date: 09 September 2026 at 1:04pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: C3 problems
Posted By: Tippmann5
Subject: C3 problems
Date Posted: 18 January 2006 at 7:45pm
i finaly got my C3, and i went out to shoot it. i turned the velocity all the way up, but yet the gun shot a little lousy. since the gun was brand new i thought it mite need oil. so i removed the end cap and the velocity screw and the piston, and i oiled it up, [not much oil, but enough] so i put it all back together and tryed to shoot it. all it did was make a buzzing noise by the pump, it's a brass colored thingy, sorry, the guns new to me, i don't know the names to all the parts. well anyways, the gun didn't fire. is it the oil?...

-------------
98% of paintballers act gangsta', if you are of the 2% that are normal, put this this in your sig.



Replies:
Posted By: Monk
Date Posted: 18 January 2006 at 9:45pm
Whyd you turn the velocity all the way up?


Posted By: Enos Shenk
Date Posted: 18 January 2006 at 10:41pm
My C3 takes about 10 pump strokes after screwing on the propane tank to prime up and start firing.

I would check that first, make sure youre not just trying to shoot it immediately and getting mad when it doesnt work. Just keep pumping and trying to fire until it gets going.

If it still wont fire read the manual on adjusting the regulator pressure. Mine needed tuned out of the box.


-------------


Posted By: Bruce A. Frank
Date Posted: 19 January 2006 at 10:13am

Originally posted by Tippmann5 Tippmann5 wrote:

i finaly got my C3, and i went out to shoot it. i turned the velocity all the way up, but yet the gun shot a little lousy. since the gun was brand new i thought it mite need oil. so i removed the end cap and the velocity screw and the piston, and i oiled it up, [not much oil, but enough] so i put it all back together and tryed to shoot it. all it did was make a buzzing noise by the pump, it's a brass colored thingy, sorry, the guns new to me, i don't know the names to all the parts. well anyways, the gun didn't fire. is it the oil?...

Did you read the manual? Have you done a search here on the 30 threads on the C-3. Oiled it? Where the manual told you to?

It is a piece of junk. I will take it off your hands and I'll pay the freight for you to ship it to me.



Posted By: ReGuLaToR99
Date Posted: 19 January 2006 at 4:55pm
Well turning your velocity 'all the way up' on any gun is going to make it shoot terribly. Too much velocity will make any paintball in any gun go off on a wild tanget. On top of that its really dangerous. Get it chronoed properly under the safe limit of 300 feet per second. And if your unsure or uncomfortable about adjusting and setting the velocity, I highly reccomending taking it to a shop or to someone who knows what they are doing. There should be a section in the owners manual about adjusting the velocity. Stay safe...

-------------



Posted By: junojpeg
Date Posted: 01 March 2006 at 10:13pm
Why would you turn the volocity up in the first place?

-------------
Woodsball:
Tippmann A-5
Responce Trigger
Flatline Barrel

Speed/Airball:
Tippmann A-5
Responce Trigger
14'Empire Twister Barrel



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net