a-5 re-assembly problems
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=149138
Printed Date: 04 August 2026 at 5:37pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: a-5 re-assembly problems
Posted By: Lewd_Crowbar
Subject: a-5 re-assembly problems
Date Posted: 26 January 2006 at 3:50am
|
hi recently my friend purchased a new a5.... after playing with it for a day we decided to take it apart for a good clean now so far so good but here comes the problem we took it all the way apart .not a simple field strip. and now we cant figer out how to put it back together and still have it work. we can assemble it but we cant find were this small sheet of metal that we found in it is supposed to go. the only way i can describe it is a small sheet of metal with a 45 degree bend in it close to one end. as a result the gun refuses to cock thanks in advance |
Replies:
Posted By: ResOps
Date Posted: 26 January 2006 at 7:15am
|
Try this link to the online manual. The illustrated assembly guide is in there http://www.tippmann.com/pdfs/products/A5/a5manual.pdf - http://www.tippmann.com/pdfs/products/A5/a5manual.pdf
|
Posted By: Lewd_Crowbar
Date Posted: 26 January 2006 at 12:10pm
|
for the life of me i cant find it on the parts diagam ive looked at it
for half an hour already? does the part i described ring a bell with
any one?(it has to have a place because right now the gun wont cock) |
Posted By: syl58
Date Posted: 26 January 2006 at 7:28pm
| maybe the sear? |
Posted By: Lewd_Crowbar
Date Posted: 26 January 2006 at 7:36pm
| naw thats still there but thnx |
Posted By: drumlinefreek
Date Posted: 26 January 2006 at 9:07pm
|
Is it the linkage arm? ------------- A-5 J&J 14" Double trig Outkast Sniper II- rolling with the pump world |
Posted By: Lewd_Crowbar
Date Posted: 26 January 2006 at 10:27pm
|
never mind every one... it was just 2 cases of stupdity on my part. the
metal bit wanst from the gun and the non cocking was due to a sleepy
mistake in which the front bolt was put in backwards |