What to oil after polish?
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=150077
Printed Date: 03 February 2026 at 12:39am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: What to oil after polish?
Posted By: KALIS-PIMENTA
Subject: What to oil after polish?
Date Posted: 11 February 2006 at 9:08pm
|
what do i have to oil after i polished my internals? In "english" please ------------- Tippmann A-5 Polished internals Rampage Board Rampage Pro-E Trigger TechT A-5Mod QEV mod Lapco autococker Adapter STIFFI Kit JCS Power Tube PALMER Stabilizer LPK PsychoZ-DF Ricochet R5 |
Replies:
Posted By: DsXz
Date Posted: 11 February 2006 at 9:16pm
| Read the 3d manual they show pics of what to oil, its the 2nd sticky in this section of the forum |
Posted By: evillepaintball
Date Posted: 12 February 2006 at 1:41am
|
and just incase that doesnt give you what your after. open up your gun, look for anypart where metal or plastic is moving accross other metal or plastic. this should be the hammer behind the powertube, the bolt on the front of the powertube, and the rod that connects the affore mentioned items. put a thin coat of oil on said areas and let her rip |
Posted By: Bruce A. Frank
Date Posted: 12 February 2006 at 4:35am
Oh, all the info is here in the "Stickied" posts but after all that polishing I know you need someone one to spoon feed you. Wipe the inside of the shells with a lightly oiled clean rag. Drop or two of oil on the forward bolt "O" ring. Another drop on the tube on which it slides. No more! A drop or two on the actuation rod...the rod that connects the front and rear bolt. A couple of drops on the "O" ring on the front end of the rear bolt. Then after the marker is re-assembled, before you install the barrel, put 4 or 5 drops in the gas hole inside the ASA (the socket into which the tank screws...you know, it really helps if you read the manual so you at least know the names of the parts so you wouldn't have to request "English" translations) Then install the tank and fire the marker 10 to 20 times to distribute the oil through out. Wipe any excess out of the ball receiver area and the tip of the forward bolt (the part that contacts the ball) Then reinstall your barrel. Do the oil-in-the-ASA thing after you clean your marker after each day of paintballing. You do always clean your marker after each day of play don't you? Verstehen Sie das? |
KALIS-PIMENTA wrote:Posted By: KALIS-PIMENTA
Date Posted: 12 February 2006 at 2:15pm
|
Yes i have and "obrigado" for the "english" it was very helpfull ------------- Tippmann A-5 Polished internals Rampage Board Rampage Pro-E Trigger TechT A-5Mod QEV mod Lapco autococker Adapter STIFFI Kit JCS Power Tube PALMER Stabilizer LPK PsychoZ-DF Ricochet R5 |