Tippmann Replacement Parts Guide
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=150225
Printed Date: 22 December 2024 at 10:01am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Tippmann Replacement Parts Guide
Posted By: Enos Shenk
Subject: Tippmann Replacement Parts Guide
Date Posted: 14 February 2006 at 9:23am
|
This topic is intended to list specifications of the miscellaneous hardware on Tippmann products. This will include all bolts and other hardware, air fittings, and o-ring sizes. A note about O-Rings. O-ring sizes are expressed in whats called "dash numbers". If you look at a list of o-rings from a supplier, they will be listed with -XXX suffixes. This is an industry standard, and one -15 ring from one supplier will have the same dimensions as a -15 from another supplier. Stock Tippmann parts are commonly black oxide finish, but if youre ordering replacement hardware, why not go Stainless Steel? Good places to order parts from are http://www.mcmaster.com,%20http://www1.mscdirect.com - http://www.mcmaster.com, http://www1.mscdirect.com You can get a basic replacement bolt or screw from any decent hardware store, you just might have trouble finding one that fits inside the countersink hole on most Tippmanns. But if you just need a bolt to get you through a game, they will work. Pro-Lite Barrel pinch bolt - 1/4-20 thd, 5/8" length Elbow pinch bolt - 1/4-20 thd, 1" length Gripframe mount bolts - 10-32 thd, 3/8" length Gripframe half bolt (top) - 10-32 thd, 7/8" length Gripframe half bolt (bottom) - 10-32 thd, 1 1/4" length Velocity adjustment bolt - 1/4-28 thd, 3/4" length set screw Gripframe mount sleeves - 10-32 thd internal, 5/8" length, 1/4" diameter Pro-Carbine (Many of these are applicable to 68-Carbine as well) Barrel pinch bolt - 1/4-20 thd, 5/8" length Elbow pinch bolt - 1/4-20 thd, 1" length Gripframe mount bolts - 10-32 thd, 3/8" length Grip panel bolts - 6-32 thd, 3/8" length Bottomline mount bolts - 10-32 thd, 1" length Velocity adjustment bolt - 1/4-20 thd, 7/8" length 98 Custom Elbow pinch bolt - 1/4-20 thd, 1" length Elbow latch bolts (Holding the part that catches the front sight) - 6-32 thd, 1/4" length Main half bolts - 10-32 thd, 5/8" length Foregrip half bolt - 10-32 thd, 1 1/8" length Grip panel bolts - 6-32 thd, 3/8" length Bottomline mount bolts - 10-32 thd, 1" length Valve bolts - 10-32 thd, 1/4" length Velocity adjustment bolt - 1/4-28 thd, 3/8" length set screw Rear bolt O-Ring: -19 size Front bolt O-Ring: -15 size Valve body O-Ring: -19 size Inside valve O-Rings (2x): -12 size C-3 All major half bolts - 10-32 thd, 5/8" length Front sight pinch bolt - 10-32 thd, 1" length Grip panel bolts - 6-32 thd, 3/8" length Regulator bolts - 10-32 thd, 1" length Bottomline bolts - 10-32 thd, 1" length Extra notes: C-3 Rear sight piece, stock grip panels, and trigger guard are identical to these 98 Custom parts. The C-3 also has a single push pin identical to that of an A-5 for the reciever to pump guide rod mount. Also the gas transfer tubing on the right side of the reciever uses Clippard part number UT0-2 swivel fittings. X-7 Main half bolts: 4x 10-32 thd, 5/8" length, 2x 10-32 thd, 7/8" length Cyclone mounting bolt: 1/4-20 thd, 7/8" length Bottomline bolt: 10-32 thd, 1 1/8" length Foregrip side rail bolts: 6-32 thd, 1/4" length Front sight bolt: 10-32 thd, 7/8" length Rear sight bolts: 10-32 thd, 1" length Rear bolt O-Ring: -19 size Front bolt O-Ring: -15 size Valve body O-Ring: -19 size Inside valve O-Ring (Behind the valve seat): -12 size Valve tombstone O-Ring: -111 size End cap O-Ring: -117 size Extra notes: Uses push-pins the same as the A-5. Trigger guard is the same as the A-5. 98 Custom Platinum Elbow pinch bolt - 1/4-20 thd, 1" length Elbow latch bolts (Holding the part that catches the front sight) - 6-32 thd, 1/4" length Main half bolts - 6x 10-32 thd, 5/8" length Foregrip half bolt - 10-32 thd, 1 1/8" length Grip screws - 4x 6-32 thd, 1/4" length Velocity adjustment bolt - 1/4-28 thd, 3/8" length set screw Weaver rail bolts - 3x 6-32 thd, 3/8" length Rear bolt O-Ring: -19 size Front bolt O-Ring: -15 size Valve body O-Ring: -19 size Valve internal O-Rings: 2x -12 size Large O-Ring set into the right gun half, seals the cyclone/RT air tap: -116 size Extra notes: Uses no valve bolts like the original 98. The gas line to the valve is a special fitting, using a left-hand threaded square nut inside the gun halves. Doubtful you could find this at a hardware store. TPX Pistol Half bolts: All 10-32 threaded, 4x 5/8 length, 2x 1/2 length, 1x 1 inch length. Trigger valve bolts: 2x 6-32 threaded, 1/4 length Bolt buffer o-ring: -118 size Main valve end cap, large o-ring: -19 size Main valve end cap, small o-ring: -12 size Main valve core, large o-ring: -12 size Main valve core, small o-rings: -10 size Trigger valve internal o-ring: -3 size Puncture valve internal o-ring: -12 size Bolt tip o-ring: -15 size Inside breech o-ring: -19 size X7 Phenom Reciever bolts: 5x 10-32 thd 11/16" length Sight bolts: 2x 10-32 thd 1" length Cyclone bolt: 1x 1/4-20 thd 7/8 length Bolt tip o-ring: -15 size Velocity adjuster o-ring: -17 size Regulator piston o-ring: -16 size Regulator sleeve o-ring: -19 size Valve spool o-rings: 3x -11 size Firing spool o-rings: 2x -08 size, 1x 1.78mm x 6.75mm Trigger valve o-rings: 2x -03 size Powertube o-ring: -18 size Notes: Cyclone air line is standard, with 1 Clippard UT0-2 fitting, and one non-standard fitting. Gas line is internal, no standard replacable components. Uses 3x long and 2x short standard A5 and X7 push pins. Sights are Project Salvo identical. Trigger guard is A5 identical. Other The RT kits and the A-5 Cyclone air fittings are stock parts from Clippard. Swivel fittings: Clippard part number UT0-2 Flow control for RT: Clippard part number MFC-3AK1 Hose: Clippard part number URH1-0402-BKS-050 (Commonly called Cocker LP hose, works for that too. 50 feet is the smallest amount you can buy direct, so check local shops first.) Tank O-Rings are the same size as Tippmann front bolt O-Rings, -15 size. ------------- 
|
Replies:
Posted By: Enos Shenk
Date Posted: 14 February 2006 at 9:29am
|
Feel free to contribute measurements and observations of your own on guns that I havent covered here. Ive tried to limit myself to only facts about parts of guns that I personally own. If Ive made a mistake anywhere in the list, just post here and Ill fix it up. -------------
|
Posted By: Snake6
Date Posted: 14 February 2006 at 10:21am
|
Enos, you have way to much time one your hands. Why dont you sticky this? |
Posted By: Enos Shenk
Date Posted: 14 February 2006 at 2:28pm
|
I DID sticky this...
-------------
|
Posted By: RavenGuard
Date Posted: 27 February 2006 at 4:08pm
|
The links to clippard don't work.
------------- Tippmann A-5 Polished Internals E-Grip Ape Board JCS Blade Trigger QEV 8" Bigshot + Apex Ricochet R-5 / Tac Cap Palmers Stabilizer 68/4500 Crossfire |
Posted By: triggerlover75
Date Posted: 28 March 2006 at 6:15pm
| do u know the # for a cylinder hose for a A-5 |
Posted By: Not All There
Date Posted: 06 May 2006 at 12:41am
|
can the Clippard links get fixed to anyone who knows those.... Nedd specifics and where to buy the adapter kits to run both a R/T and Cyclone Feed System Air ------------- Tippmann 98 Custom -Polished Internals -Cyclone System -16" Smart Parts Linear Barrel -Double Trigger -Responce Trigger -Painted and Milled Shell -Nitro www.notallthereracing.com |
Posted By: BigRob
Date Posted: 04 June 2006 at 11:19am
| if anyone knows the sizes and specs on the o-rings that would help me out. i have a place to buy rings in bulk pretty cheap, but the guy needs to know the size, thickness, and hardness of each ring. |
Posted By: Snake6
Date Posted: 04 June 2006 at 11:44am
I'll ask Enos for you, he most likely knows. ------------- 
|
BigRob wrote:Posted By: BigRob
Date Posted: 04 June 2006 at 12:32pm
|
that would be appreciated. ive got 2 98c's and a few of the guys i play with shoot 98's. im sure all of us would appreciate the info so we could get the O rings to complete our toolboxes. ------------- 98 Custom - CP 12" barrel - Delrin Starfire bolt - Double Trig. - Drop Forward - Rocket Cock II - FieldStrip Thumbscrew Kit - Red Dot Elec. Pistol Scope - Butt Plate & combat strap w/ rear swivel |
Posted By: jojo
Date Posted: 07 June 2006 at 9:35pm
| Does anybody know if the drive spring from the A5 or model 98 is the same size as the carbine? |
Posted By: Snake6
Date Posted: 07 June 2006 at 11:00pm
|
Yes, the A-5, 98, and Carbine Series all use the same size main drive spring.
-------------
|
Posted By: BigRob
Date Posted: 15 June 2006 at 8:33am
|
any word on the o-ring specs? ------------- 98 Custom - CP 12" barrel - Delrin Starfire bolt - Double Trig. - Drop Forward - Rocket Cock II - FieldStrip Thumbscrew Kit - Red Dot Elec. Pistol Scope - Butt Plate & combat strap w/ rear swivel |
Posted By: torontopbguy
Date Posted: 11 September 2006 at 11:33am
|
Sure would love to have O rings specs to put a bunch of spares in the tool kit. TorontoPBGuy
|
Posted By: BigRob
Date Posted: 20 September 2006 at 1:29am
|
yeah i got a guy that sells o-rings 100 for $4. if i can get the specs i can put together one hell of an o-ring kit, and the guy said if i get him the specs he will sell em on ebay a 100 piece mix n match set for the 98 custom for $5. sure beats paying 6 bux for 1 set of orings. ------------- 98 Custom - CP 12" barrel - Delrin Starfire bolt - Double Trig. - Drop Forward - Rocket Cock II - FieldStrip Thumbscrew Kit - Red Dot Elec. Pistol Scope - Butt Plate & combat strap w/ rear swivel |
Posted By: an94
Date Posted: 30 September 2006 at 9:39pm
|
Heres a good link to clippard. com http://www.clippard.com/ - http://www.clippard.com/ just tell it where you live then it will send you to the proper place. ------------- 1 paintball gun package=$150 1 case of paint=$50 air & entry fee=$15 lighting up newbies all day long= Priceless |
Posted By: bethelcc
Date Posted: 17 November 2006 at 10:59am
|
Enos, thanks for the bolts specs!!! It will be great to have a stash of replacement blots, and http://www.mcmaster.com/ - http://www.mcmaster.com/ is AWESOME! Is there any possiblity of getting the specs on all the Tippmann pins and springs (especially that evil Blue Sear Spring on the new ACT's... why did they change the trigger mechanism???) Also, I've looked and looked and I can't find any info anywhere on the little rubber piece inside the CO2 Tank Brass Pin Valve. You know, the one that always cracks and then your tank won't stop leaking. If I could just get my hands on a bunch of those I wouldn't need to spend $6.50 every time a tank gets a leak. I tried to look it up on mcmaster, but I don't have any idea what the thing is even called. Anyway, thanks for this Thread and all the info. ------------- Tom O'Brien Program Director Bethel Christian Camp, SC (1) Tippmann 98 Custom (10) Tippmann 98 Rental ACT |
Posted By: Enos Shenk
Date Posted: 31 January 2007 at 6:34pm
|
Added X7 bolt specs. Ill look into getting O-Ring dash sizes up here. I can get most of the easy ones, Im not to keen about cracking my valves open to get the dash numbers for the valve o-rings though. Im not sure what you mean by the rubber tank thing either, the tank o-ring? Or the burst disc? -------------
|
Posted By: White Rook II
Date Posted: 11 June 2007 at 10:39am
|
Any luck with those O-ring sizes for Custom Pro's? ------------- That's OK, I Wasn't Using My Civil Liberties Anyway |
Posted By: mhannah_07
Date Posted: 19 June 2007 at 6:08pm
| Does anybody know if your able to get the replacement parts for a Tippmann Model 98's main body covering (Like the two metal parts that hold the guts together). anything about it would be great. thanks |
Posted By: thejudge
Date Posted: 09 December 2007 at 11:32pm
|
paintball discounters has both the pro and the normal 98c body receivers... http://www.paintball-discounters.com/get_list_36 3.htm That is all of the other parts from factory too. ------------- Stay low, run fast, and hope that paintball doesn't hit your... http://www.deltasquad.info/"> 
|
Posted By: Enos Shenk
Date Posted: 05 March 2008 at 8:06pm
|
Updated Mar 5 2008 with o-ring sizes, and 98 Custom Platinum details.
-------------
|
Posted By: 68caliber
Date Posted: 06 March 2008 at 7:11pm
| Hope this isn't a stupid question, but is there an o-ring list for the A5? |
Posted By: Enos Shenk
Date Posted: 12 March 2008 at 11:07pm
|
I dont have an A5 currently to spec parts from. I would imagine the X-7 o-rings are the same though. All modern Tippmann's use the same o-rings for the valve/bolts. -------------
|
Posted By: 68caliber
Date Posted: 13 March 2008 at 6:16pm
|
You're right. Just compared the two. Same O-rings.
|
Posted By: blindfire
Date Posted: 14 April 2008 at 6:57pm
|
The screw in the banjo fitting on my A-5 broke in half while I was tightening it, for some reason there was very little resistance. Where can I get a replacement? I have only been able to find replacements for the Response trigger T banjo fitting. |
Posted By: tomc101
Date Posted: 06 September 2008 at 2:54pm
|
are there any uk websites or sites that ship to the uk that will sell the two metal halves surrounding the model mine is damaged, and i need a replacement ------------- tom c 101 |
Posted By: R2!.wafflepanda
Date Posted: 30 March 2009 at 11:39pm
Nice thread this is just what I needed!
------------- Setup: Tippmann 98C 14 in. J J Ceramic Barrel NXE 5 Pod Harness Tippmann Double Trigger E-trigger (WAS) Evlution 3 |
Posted By: SlamSlayer
Date Posted: 26 April 2009 at 6:25pm
| Does anyone have any info on the thread type for the 98c platinum gas line? I need the asa side. Trying to find an adapter to fit it into the regular 98c thread (female) for a palmer stabilizer. |
Posted By: sacrificecrow
Date Posted: 08 July 2009 at 2:52am
| Hello all, I have a problem with my tpx. after a few hours of playing with my gun. we were packing up and I still had some balls and co2 in the tpx. so I was gonna shoot off the remaining gas when the ball chopped. 1st of the whole day... I didn't think anything of it and shot out the rest of the balls through the messy barrel til the gas ran out. When i got home, took apart the gun to clean it out, I noticed the o-ring for the front bolt was missing. I looked all around and didn't see it anywhere. My guess is that the ring got blown out with that chop or there after...but my main question is what other o-ring can I use for the front bolt. I have another game friday... it's a shame that my local retailer do not know enough to know right off hand. without another o-ring to match, it will be hard for them to match with what they have in there strore. any assistance will be greatly appreciated |
Posted By: TinMan
Date Posted: 08 July 2009 at 9:26am
*edit. Your Platinum 90 degree fitting will work.
If you don't have it, you just need an A-5 or X7 90 degree elbow found on any A-5 ASA.
It has the flared seat your looking for, needed for the Stab.
|
Posted By: Enos Shenk
Date Posted: 14 July 2009 at 5:34pm
|
Edited July 14 2009 with TPX pistol bolts and o-ring specs. Bloody hell does that thing have a LOT of o-rings...Sorry I couldnt size the gas line o-rings and the 2 o-rings between the trigger and main valve, theyre ungodly thin and actually not listed in my catalogs.
-------------
|
Posted By: Troopr
Date Posted: 07 October 2009 at 4:52pm
|
I take it the Model 98 parts, are the same as the 98 Custom parts?
------------- <3's Paintball w/ TippMann Alpha Black Tactical Marker TippMann Project Salvo Marker After Market E-Trigger TippMann SSL-200 E-Hopper |
Posted By: oldpbnoob
Date Posted: 07 October 2009 at 6:24pm
------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
Posted By: Troopr
Date Posted: 07 October 2009 at 10:44pm
 ------------- <3's Paintball w/ TippMann Alpha Black Tactical Marker TippMann Project Salvo Marker After Market E-Trigger TippMann SSL-200 E-Hopper |
Posted By: Fuzzey5-0
Date Posted: 09 November 2009 at 1:24am
| Outstanding documentation... Thank you!! |
Posted By: muerte26
Date Posted: 20 August 2010 at 2:05am
|
PRO Carbine help please. Any info on a part number/ID to the velocity adjuster spring on and main drive spring. I'm sure these should be found online rather than ordering direct. |
Posted By: oldpbnoob
Date Posted: 20 August 2010 at 8:14am
|
Look a couple of posts up. http://www.tippmannparts.com - www.tippmannparts.com . They have complete manuals and parts for most tippmann markers. Not sure what all they have for the Pro Carbine, but worth checking. ------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
Posted By: muerte26
Date Posted: 20 August 2010 at 4:16pm
|
yeah i was hoping to get a general part id so i can go online and order a lot of 15 or 30 kinda like orings. ordering directly from those paintball places will kill the my bank. so far i only know is the drive spring length is 4 3/8. |
Posted By: oldpbnoob
Date Posted: 20 August 2010 at 4:34pm
|
You really shouldnt have to change the o-rings that often. Nearly every marker I have had for the past several years has most if not all of the original o-rings. Buy one or two full sets and it should last you a lifetime. ------------- "When I grow up I want to marry a rich man and live in a condor next to the beach" -- My 7yr old daughter. |
Posted By: DrKukary
Date Posted: 22 November 2014 at 3:18am
|
Is it possible to find a check valve pin/seal (I think that is the right name) for the TiPX remote line adapter? Mine is leaky and I'm not sure what I want to do with it. ------------- A5, 98 Custom Pro, TiPX |