This is an A5 as you can see. But the mechonism is now also the stock.

The trigger system is an E-grip whired into the grip/stock. The Qloader system is self made. Unlike the qloader-a5 mod i dont have to make any perminent changes to the A5 body...the gun can be coverted to its original design in under 30 min.

The body was cut out of a single pice of plasic and milled out with a dremell to fit in the e-grip parts. The barrel is a suppresed flatline that actually makes it significantly quieter.

The air is ran in through a SpecOps toumb stone to reduce the profile.

http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=149371&KW=pvt%5Fmon - This link what it looked like before I started. http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=145002&KW=pvt%5Fmon - This link another project i did a while back.

This is all done with basic tools like file, saw, drill and Dremel. It took me a week start to finish.

Constructive critisism is greatly appriciated. A simple rating would be nice too. I'll be honest, this is in part to brag a little.

Awesome job! I have been thinking about making a bullpup A-5 by fitting it into the back end of a Famas assault rifle; probably use a cheap airsoft gun body for the shell. Bullpup is definitely the way to go: you get a long barrel for accuracy, stability of a stock, and balance of having the grip in the center, while keeping the whole package fairly compact.

I can't believe it only took you a week. That had to take a lot of Dremmeling, especially to keep the E-grip components lined up properly. I give it 8/10, only needs some performance acessories such as an RVA, x-chamber or reg (unless your running HPA). Also, since you have the red dot scope and removed the front sight, I'd dremmel off the rear sight so it wouldn't be in the way of getting your mask in close to the gun.

Did you do that yourself ??? man, if you did, and it works fine...  you are very good at what you do.  If given the proper materials, that marker would look much cleaner.  I like how you relocated the trigger up forward.  Man, that's creative !!! 

Monkey Dust wrote: 10/10 for the work. 5/10 for looks.

I agree.And IMO i think it was a waste of time for the hopper.I would of just got rid of the sight , but thats me.

i see one

pretty good

id say make it all one color

instead of the marker, barrel, body be diff colors

edit: i see em now, why is one half of the A5 silver with camo painted on and the other half black?

i like it alot, but mayvbe you should consider making a barrel shroud that would be srectangular as to match the body, and paint the whole thing some kind of od green

-119

To Answer Some Of Your Questions.....

My A5 is not an original, http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=132711&KW=Jefangel - This one is by Jefangel (link).

Those of you who dont like the way it looks don't apritiate simplicity. For my the buty of this gun lies in it's practicality and simplicity. It really doesn't have anything extra on it. The botom (green) frame is down to the bear basics.

Yes, Jefangel's gun is more streemlined and maybe a little more ergonomic. But in the end both our guns are the same in basic design (Bullpup) and prform the same function. Mine is just simpler and was much easyer to build.

A Bullpup is a design where the receiver is also the stock. yes, some definitions refer to the magazine, but the magazine is inserted into the receiver which also contains the main mechanism. The P90 and the Steyer AUGwhere are my mind but they didnt influence my design exept for being Bullpup guns.

Also I have fired the P90, Steyer, and a lot of other guns in full auto and I'll have to say that the P90 is very impressive: it has very light recoil, amazing cyclic rate and almost no muzle climb.

The Barrel is covered with pice of camo cloth. it will be easy to clean after every game so im keeping it on.

Im considering adding a set if ruber grip sides from a Tippmann98 and maybe a trigger guard but only after I play a game. Im paying more attention to preacticality ratehrthen looks. 

THe color patern is staying the same. the stock is OD green and the gun is black. the Colors might not really flow but they are simple and practical. And because moat of it will be tucked in agenst my shoulder and covered by my arm the colors dont really matter.

I got a few pices of platic about 18in/6in/1in at a store that makes cabinets and shelves. Home Depot might have what you want. Another member asked me for the breakdown of the Qloader mount. I'm going to make anotherpoast of a How-To make your own A5 Qlaoder mount with out any majer permonent changes to the gun frame. Also anyone who wants to try to make their own...pelase be my guest and let me kow how it works out...id be happy to make a diagram of the way i did it.

I'm also considering making another one or two stock-grips with e-grips built in....how much would you guys pay for it considering the amount of work and the egrip price?

Thank you for all the responce and keep them comming id be glad to help if anyone tryes this for them selves. If you have specific questions you can PM me...its easyer to aswer them on an individual basis.