Print Page | Close Window

Tippmann Pro-Lite Safety Install Question

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=150668
Printed Date: 24 February 2026 at 4:53pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Tippmann Pro-Lite Safety Install Question
Posted By: padester79
Subject: Tippmann Pro-Lite Safety Install Question
Date Posted: 21 February 2006 at 8:13pm

Hi again guys, I was wondering if anyone knows how to install a safety on a tippmann pro lite. There are three parts for the safety:

1. Safety

2. Snap Ring

3. Oring

I cant figure out how to install this and it is driving me crazy because I can't play on our field without a working safety.  I took the grip frame halves apart but it seems that the oring around the safety is way to big to push in the hole. Are there any tips/tricks on how to get it in there? I know that a snap ring pliers are needed, but thats it. Thanks in advance




Replies:
Posted By: clownshooter
Date Posted: 22 February 2006 at 11:36pm
Oil the o-ring up real good with some Hoppe's # 9 oil. You are correct in that it is not easy to push the safety in because of that o-ring. Oil it up good and apply steady even pressure and it will slide in. I found that disassembling the grip frame halves doesn't make it any easier.
Once it is in, install the snap ring and you are done.


Posted By: padester79
Date Posted: 23 February 2006 at 8:39pm
Ok thanks for the help clownshooter . I will try that.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net