98 flatline help
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=151484
Printed Date: 03 July 2024 at 3:55pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 98 flatline help
Posted By: 98killa
Subject: 98 flatline help
Date Posted: 08 March 2006 at 5:11pm
|
I’m sorry if this has been asked before, but I have recently purchased a flatline and I can’t for the life of me get it to work. There is more paint I’m my barrel than on my target. The paint I’m shooting goes all over the place and my marker is set to 270 fps. I have also tried going through the paint taking out any defective balls and also the balls seem to be the right caliber, they roll trough the barrel fairly easily. I’m 99.99% sure that I have it in far enough. Could it be a defective barrel? |
Replies:
Posted By: not2messwith
Date Posted: 09 March 2006 at 5:15pm
|
What kind of paint are you using? What is the air temp? ------------- http://img51.imageshack.us/my.php?image=my982lm.jpg"> 
|
Posted By: 98killa
Date Posted: 09 March 2006 at 5:19pm
| i am using premium and spectrum paint at -0 degrees celcious |
Posted By: pntbl freak
Date Posted: 09 March 2006 at 9:45pm
| Make sure the barrel is straight. With the 98 you can tilt the barrel a little bit and that will cause the paint to curve one way. Also make sure the paint doesnt have any dimples or softspots on it. And make sure the inside of the barrel is clean. |
Posted By: Snake6
Date Posted: 09 March 2006 at 9:46pm
|
Are you using CO2? In lower temps CO2 will do stuff like that.
------------- 
|