98 EXPANSION CHAMBER KIT
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=152124
Printed Date: 02 March 2026 at 10:42pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 98 EXPANSION CHAMBER KIT
Posted By: ceas
Subject: 98 EXPANSION CHAMBER KIT
Date Posted: 21 March 2006 at 3:51pm
| Now that I put on a expansion chamber kit my gun will only shoot 254pps . Do I have to set it so I can shoot 280 ? |
Replies:
Posted By: pntbl freak
Date Posted: 21 March 2006 at 4:07pm
| Did you try to adjust the velocity? Also make sure there arent any air leaks. |
Posted By: Bango
Date Posted: 21 March 2006 at 4:11pm
|
Try a new spring kit for your rear drive spring. Polishing your internals will also do the trick.
------------- http://imageshack.us"> 
|
Posted By: ceas
Date Posted: 22 March 2006 at 10:13am
| I did adjust the velocity and there is no air leaks. I just got this gun should I have to put a spring kit in it ? |
Posted By: Bruce A. Frank
Date Posted: 22 March 2006 at 11:46am
|
Sounds like the passage ways through the expansion chamber are too restrictive. Maybe some sealant (Teflon tape) got into an internal orifice? If things worked before the chamber was installed then it can be nothing other than the chamber or the installation. Remove it. Inspect it. Try the marker again without it. Reinstall carefully and let us know. -------------  
|
ceas wrote:Posted By: ceas
Date Posted: 03 April 2006 at 5:27pm
|
the guy from tippmann said that it my be my stock I put on it and to try that
|
Posted By: MoNkeY Hunter
Date Posted: 03 April 2006 at 9:08pm
| Take it off and clean the inside of the Xchamber, its probly somthing stuck in there like sealent. |