Gun Maintenace and Repair - response trigger

Print Page | Close Window

response trigger

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=153541
Printed Date: 26 January 2026 at 8:01pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: response trigger

Posted By: mkinnett1
Subject: response trigger
Date Posted: 19 April 2006 at 1:31pm

I recently sent my a5 back to tippmann for velocity issues and r/t issues. They replaced the gun for the velocity issues (which i still not sure if fixed). And they replaced the flow connector bolt for the r/t issues. I just got the gun back and tried it and the r/t still isn't working. They said it isn't because I am using compressed air and they test theirs with CO2. Can anyone elaborate on this and help me out because I always thought compressed air was better.

Replies:

Posted By: cus98tom
Date Posted: 19 April 2006 at 10:05pm

you have to adjust the R/T

Posted By: mkinnett1
Date Posted: 20 April 2006 at 8:10am

I have adjusted the r/t. I have it tightened all the way and there is no resistence whatsoever.

Posted By: cus98tom
Date Posted: 20 April 2006 at 9:13am

You have a leek , possably a damadged o-ring or there is a Banjo (#02-83) bolt on the left side of the marker , opposite the R/T valve control . make sure the port(hole) in the banjo bolt lines up with the port of the connector fitting(#02-80) -look on the scematics for the A5 stealth w/RT . The fitting I am referring to is on the marker and the lower reciever (trigger and grip) portion of the R/T inserts into this fitting when ataching the the grip hope this helps.