Which Gun is Best - Palmers Stabilizer Question

Print Page | Close Window

Palmers Stabilizer Question

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Which Gun is Best
Forum Description: Need Advice? Ask the pros.
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=154030
Printed Date: 28 September 2024 at 10:50pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Palmers Stabilizer Question

Posted By: zataru
Subject: Palmers Stabilizer Question
Date Posted: 28 April 2006 at 1:37am

whats the difference between the male and female?

i have an A-5 wich one would i need to get to get it to work right?

Replies:

Posted By: Yurrix
Date Posted: 28 April 2006 at 10:41am

It refers to the type of threading on the palmer.

If you want to hook the reg up vertical into the gun and run a line down to the handle, you want the male varient.
http://http://www.palmer-pursuit.com/images/stab-setups/layer2/a-5.jpg -
http://www.palmer-pursuit.com/images/stab-setups/layer2/a-5.jpg - Male Stab setup

Posted By: DVLCHLD
Date Posted: 28 April 2006 at 8:30pm

If you use CO2 the Palmers Stabilizer is a must have. I can't believe how much my accuracy has improved since installing the PS. The first time you use it you may only be able to get your velocity up to about 250 FPS. After about 500-1000 shots you should be able to reach 300 FPS. I adjust the velocity screw out then set my velocity with the stab then use the velocity screw for fine tuning.

-------------
I've never seen anyone own the woods because of what marker they use.

Posted By: mobius_1
Date Posted: 29 April 2006 at 1:16am

Here is a link to the Palmer online store for the A5 kit https://palmer-pursuit.com/ecom/product_info.php/cPath/56_53/products_id/44?osCsid=c5d6f6c7a17c20340a2df20c6fc785bd - A5 Stab kit

-------------
"Here are beauties which pierce like swords or burn like cold iron."

-C.S. Lewis

Posted By: Shub
Date Posted: 30 April 2006 at 2:26am

The male Stabilizer has the same threads as your CO2 tank. This is the easiest, and probably what you will want...you screw the regulator into the tombstone, run the gasline from the regulator to the ASA.

The female Stabilizer has threads to screw onto a CO2 tank. This would be the prefered setup if you used a remote coil and didn't want the regulator on your gun.