Egrip
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=154594
Printed Date: 18 July 2025 at 2:15am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Egrip
Posted By: CryptKeeper
Subject: Egrip
Date Posted: 09 May 2006 at 5:56pm
| Estratego the European Dealer of Tippmann just got the new Egrip with WAS board, i kinda want to buy one but i'm still using co2, soo my doubt is if i can use the A5 with the new egrip with all the mods using co2 on her!!! can i? or can i not use it... :( |
Replies:
Posted By: redneckcgil29
Date Posted: 09 May 2006 at 6:01pm
|
no pic no post son ------------- , gilbert GET-R-DONEEEEEEEEE!!!! [*><*] [*><*] let it fly |
Posted By: Bango
Date Posted: 09 May 2006 at 6:02pm
|
Yes you can use C02 with the E-Grip. I'd suggest buying a palmers regulator too. By the way, you should put this in the upgrades section. ------------- http://imageshack.us"> 
|
Posted By: Snake6
Date Posted: 09 May 2006 at 6:04pm
|
No pic, no post. ------------- 
|
Posted By: sinisterNorth
Date Posted: 09 May 2006 at 6:08pm
|
In before lock ------------- Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. |
Snake6 wrote:Posted By: Snick
Date Posted: 09 May 2006 at 6:08pm
|
yeah you can still run CO2, its still a tippmann. the only thing you gotta worry about is getting liquid CO2 in the gun. shooting at high rates of fire will make the co2 start to come in the gun as liquid because it has less time to evaporate and become a gas. when you get liquid CO2 in your gun it causes volocity spikes that mess up conistency, and also it can get into things and blow o-rings. the way to stop liquid co2 getting in you gun is by getting a regulator or expansion chamber. I would suggest a regulator because those are far more effective that a expansion chamber, because all a expansion chamer does is make it so the co2 has more time till it gets in the gun, so basicly it makes it so you just have a bit more time, if you keep firing at a high rate you will still get liquid in your gun. but anyways, yeah you just gotta worry about liquid in your gun if you run co2. as I said, just get a reg and it should eliminate any problems you would have with that. hope this helps -------------  
|
Posted By: tecumseh
Date Posted: 09 May 2006 at 6:08pm
|
yea, this should be posted in the other forum, either the new players or the upgrades and customizing. in before lock ------------- what? |
Posted By: CryptKeeper
Date Posted: 09 May 2006 at 6:09pm
|
ops sorry, i was distracted and posted in here... but thanks anyway guys!!! Snick and a remote can help too? |
Posted By: Snick
Date Posted: 09 May 2006 at 6:46pm
|
Yeah, a remote will act as a expansion chamber also. basicly what the expansion chamber does it it makes it so the gas goes through alot more lining and chambers before it enters the gun so that the co2 has more time to become a gas. a remote practically does the same thing because the remote has such a long cord. you may not realize it, but with those coils, you have a good amount of cord there between the gun and the co2, and that works just as good as an expansion chamber to give the co2 time to evaporate. -------------
|
Posted By: Fets
Date Posted: 17 May 2006 at 12:45pm
| I have remote & X-chamber and get consistent velocity in 25 degree temps. They are very effective together. |
Posted By: reaver12345
Date Posted: 17 May 2006 at 1:26pm
In Before Lock ------------- Tippmann 98 custom RT Remote Collapsible Stock Cyclone Feeder Double Trigger Red Dot Scope Apex A-5 Remote Flatline Collapsible stock E-Grip Spyder Electra VLocity select force viewl |