Problem with internal valve,powertube.A5
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=154827
Printed Date: 10 July 2026 at 4:46pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Problem with internal valve,powertube.A5
Posted By: ffdd
Subject: Problem with internal valve,powertube.A5
Date Posted: 14 May 2006 at 8:50am
Hi.
i´m having a problem with my A5. The valve washer of internal valve of the powertube set free by the TombstoneAdapter hole. My question is, how can I fix it?
Thanks.
|
Replies:
Posted By: RavenGuard
Date Posted: 14 May 2006 at 2:30pm
shove it back in with an allen key or pencil or somethin.
-------------
Tippmann A-5
Polished Internals
E-Grip
Ape Board
JCS Blade Trigger
QEV
8" Bigshot + Apex
Ricochet R-5 / Tac Cap
Palmers Stabilizer
68/4500 Crossfire
|
Posted By: Balor
Date Posted: 14 May 2006 at 2:59pm
That's the long and the short of it buddy. It'll take you a minute just push it all back in and set the O-Ring. When you are maintaining your marker, don't cock it without the Tombstone in. That should prevent this from happening in the future. Be careful not to damage the O-Ring.
-------------
A-5
E-Grip w/ WAS board
JCS Jet Click Ratchet
CAR Stock
12" Palmer Brass Barrel
Remote
68/4500 Crossfire HPA
Polished Internals
Maddmann Spring Kit
http://www.a5og.net/ - http://www.a5og.net/
|
Posted By: ffdd
Date Posted: 15 May 2006 at 8:34am
where I put the o-ring? I try to put it on the valve, but it doesn´t fit on it! Can you help? thanks a lot. It was because I have cocked the gun without the tombstone,like you said Balor.
|
Posted By: Gropo
Date Posted: 31 May 2006 at 2:12pm
I just did this to myself as well. It was the first time I have disassembled my A5, so of course I wanted to test that the innards were put back in right. Out pops both the washer and o ring.
A quick search of the forum and there's the answer. After putting the washer back in I used a dull dental probe to work the o ring back into place. Alll seems fine now.
|
|