Print Page | Close Window

Am I missing something here?

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=155094
Printed Date: 03 April 2026 at 5:22am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Am I missing something here?
Posted By: Beardlesstulip
Subject: Am I missing something here?
Date Posted: 20 May 2006 at 12:11pm

Okay, Well A while back I took my stock off to put it in a bag. I was careless and stupid and put the spring in my pocket. It got bent and really didn't work(I couldn't cock the gun). So I thought it was just a crappy spring. But when I took apart my friends gun. I noticed a big piece that he had and I didn't. Normally I would automatically think I lost the piece, but I don't know how it would come out and I seem to remember the gun working a while ago and that piece not being there, but I'm not 100% sure. I think maybe I am missing a piece, but my gun is a lot newer than my friends and his is equiped with Respone Trigger. Here are pictures of the two guns back pieces were the drive spring goes. Mine's the first, my friends the second one. You can see how mine is a big hole, but my friends has a tiny hole where the spring easily fits into.




Replies:
Posted By: jkiddx2003
Date Posted: 20 May 2006 at 1:09pm
look at the 3D manual that is stickied at the top of the "maintenence and repair" board. make sure u have all of those pieces towards the back of the gun


Posted By: Beardlesstulip
Date Posted: 20 May 2006 at 1:30pm
No, That hasn't helped. I'm just asking if i'm missing a piece back there or not. If you could look at yours and check or w/e. That would be good.


Posted By: gslstar
Date Posted: 20 May 2006 at 1:37pm

Your friends bolt looks like my A-5's bolt. Your bolt looks very suspicious, as if something is missing. I'm not sure  what though. It may be an older style bolt or something. My custom 98 has a bolt that seperates into three pieces. Yours kinda looks like a 98C bolt without the cocking rod and insert.

Hope that sheds some light on things for you!



-------------
Keep it clean


Posted By: Beardlesstulip
Date Posted: 20 May 2006 at 1:45pm
Yea, these are both a-5's here. Same type of gun. So I'm comparing them and seeing that it looks like my friends has an extra piece that I need. The spring and rod aren't in, but it doesn't matter. When I assemble it. It won't cock. I think it's because there is a missing piece.


Posted By: gslstar
Date Posted: 20 May 2006 at 2:16pm

O.K. I went onto tippmannparts.com and looked at the bolts. It looks as though your bolt is considered a new bolt style. It did not show the back end , so I couldn't tell if your missing something or not.

I'll keep looking though



-------------
Keep it clean


Posted By: gslstar
Date Posted: 20 May 2006 at 3:07pm

Is this the item you may be missing?

http://www.tippmannparts.com/index.cfm?fuseaction=catalog.prodInfo&productID=921&categoryID=13 - http://www.tippmannparts.com/index.cfm?fuseaction=catalog.pr odInfo&productID=921&categoryID=13



-------------
Keep it clean


Posted By: Snake6
Date Posted: 20 May 2006 at 3:14pm
Yeah, thats what he is missing. Your Friend has the old style bolt, and you hav ethe new one. The new one has 2 pieces to it, the insert and the bolt itself. Whereas the old bolt is a single piece of aluminuim.

-------------


Posted By: FA22RaptorF22
Date Posted: 20 May 2006 at 3:21pm
Well actually, the old ones have an insert too.  except the insert is aluminum too.  The new ones are 2 piece. except the insert is plastic.  The material and shape of the bolt insert is the only difference.

-------------
Please sign up at http://www.tippmannowners.com/ - http://www.tippmannowners.com/ and leave the referrer as me (FA22RaptorF22)and you will be my hero.


Posted By: RavenGuard
Date Posted: 21 May 2006 at 3:19pm
my bolt doesn't seem to have an insert... looks like the older one.  Is the newer one somehow better?



-------------
Tippmann A-5
Polished Internals
E-Grip
Ape Board
JCS Blade Trigger
QEV
8" Bigshot + Apex
Ricochet R-5 / Tac Cap
Palmers Stabilizer
68/4500 Crossfire


Posted By: cus98tom
Date Posted: 21 May 2006 at 3:42pm

The 98c had the aluminum insert, not the A5.

 



Posted By: Ilford Rule
Date Posted: 21 May 2006 at 5:03pm
the CPro has a plastic insert.

a question about the bolt on all tippmanns except C-3s. Is the bolt delrin? or just normal plastic?


-------------
CPro (w/ polished internals)
14" Bigshot
BT SBS
Various Rails
NcSTAR D4B
Macro
AA 68/45

CCI Phantom
45 Grips


Posted By: Beardlesstulip
Date Posted: 22 May 2006 at 12:24pm
I found the piece and now it's working. It's just a black piece of plastic. My gun is newer. I bought it in April and my friends is a lot older.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net