Gun Maintenace and Repair

Print Page | Close Window

JCS problem

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=155463
Printed Date: 11 January 2026 at 4:39pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: JCS problem

Posted By: ianatomy
Subject: JCS problem
Date Posted: 30 May 2006 at 10:00pm

ok so i think i have everything set up and the grip clicks when i pull the trigger when the grip is off the gun....but when i add the safety and put it on the gun it wont activate the solenoid?

any suggestions?

Replies:

Posted By: Torquestar
Date Posted: 31 May 2006 at 12:46am

What about when the safety is assembled to the grip and it's off the gun? Does it still not work?

Posted By: cus98tom
Date Posted: 31 May 2006 at 5:49am

The micro switch on the A5 is pressed down by the trigger in the static position ( on but not pulling the trigger). When you pull the trigger the actuator on the trigger pulls away from the micro switch activating the solenoid.This negative logic is basically to help with jarring and bumping the marker during a game so you don't get accidental discharges. But anyway the JCS is a very good trigger but it is also finicky. With you looking at the trigger assembly ( with it on the marker (DE-GASSED)) you can see the actuator of the trigger make sure it is pressing down the micro-switch , it only takes slight turn of the set screw to adjust the trigger to the proper hight, But it might take you several attempts to get it right. After you set the trigger to the correct position, set the marker to shoot full auto or ramping, then gas up the marker and take some test shots , see if the marker keeps shooting by itself , sometimes the trigger is set to sensitive and will take off on you. Any ways if you get extra shots you will have to readjust.

Posted By: ianatomy
Date Posted: 01 June 2006 at 6:31pm

yeah what was happening was the spring that i replaced was too weak and it made the trigger pull back so when i put it on the gun i was pulling the trigger when it was pulled back already thanks