98C Cocking Problems
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=156041
Printed Date: 23 December 2025 at 11:08pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 98C Cocking Problems
Posted By: makave7
Subject: 98C Cocking Problems
Date Posted: 12 June 2006 at 4:04am
|
Hey, not sure what it is but my 98 stops firing after i shoot off a steady stream of about 8-10 shots. The hammer is still cocked back but wont fire. I would have to pull the hammer just a little way more about a centimeter or two and it enables it to fire off 5-6 shots before having to repreat the process. I have the push spring sear version for my gun and it looks like I am missing a pin thats in between the bottome of the sear and the back of my trigger. If anyone can get a pic of the inside of a 98c with a push spring sear, please post it up or give me a link. Im thinking that is my problem but if anyone else has had it and found a way, please let me know. Thanks |
Replies:
Posted By: BigRob
Date Posted: 12 June 2006 at 4:06am
|
there is a quite detailed 98c topic in this section of the forum. look at it. ------------- 98 Custom - CP 12" barrel - Delrin Starfire bolt - Double Trig. - Drop Forward - Rocket Cock II - FieldStrip Thumbscrew Kit - Red Dot Elec. Pistol Scope - Butt Plate & combat strap w/ rear swivel |
Posted By: casper8x
Date Posted: 12 June 2006 at 6:44pm
Link? ------------- Milled & Cut 98Custom A.P.E. Board Polished Int. Palmer's Stab. Apex mounted on C.P. Classic Center-Fed Halo B |
BigRob wrote:Posted By: manoman12
Date Posted: 12 June 2006 at 6:55pm
|
Search? |
Posted By: casper8x
Date Posted: 12 June 2006 at 7:56pm
|
He brought up a post concerning it. It's only considerate to include a link to said topic. Also I am curious about his question being as that I have the same problem. I have read countless "won't recock problem" posts most of which are easily explained/remedied due to obvious reasons. Although I have not been able to resolve the issue he stated. If you would like to actually be helpful on the forums you could share some of your knowledge. Makave7 a pic of the pins can be found in the 3D manual sticky in this sub forum.  ------------- Milled & Cut 98Custom A.P.E. Board Polished Int. Palmer's Stab. Apex mounted on C.P. Classic Center-Fed Halo B |
Posted By: makave7
Date Posted: 12 June 2006 at 10:10pm
| Hey, lookin at that pic, I could see that I'm missing that one pin in the bottom end end of the sear and the back of the trigger, s i believe i only have 4 pins. Im guessing that might be my problem. |
Posted By: thornygravy
Date Posted: 12 June 2006 at 10:36pm
|
i think ur hopper is just not fast enough.. ------------- -Tippy 98c -Polished Interns. -RD Double Trig. -5'' Drop -j+j ceram 14'' -12v revy x-board -SmartParts Grips -Pen Spring Mod -Milled Rear Sight -Filled Front Grip -Blue Paint job |
Posted By: Snake6
Date Posted: 12 June 2006 at 11:03pm
DING DING DING! Give the man a cookie! ------------- 
|
Posted By: tippya5extreme
Date Posted: 12 June 2006 at 11:43pm
|
i had the same problem with my friends gun. i could be your trigger but that wasn't the case with mine. i took my gun apart and lubed everything up really good. thin it worked fine ------------- http://imageshack.us"> 
tippya5extreme |