Palmers Stabailizer
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=156232
Printed Date: 15 January 2026 at 2:58am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Palmers Stabailizer
Posted By: SRG.Slims
Subject: Palmers Stabailizer
Date Posted: 16 June 2006 at 2:15pm
|
i got a 98 custom and i heard the Palmers Stabailizer are really good i do a search and it comes up with a whole bunch of differnt kinds!so what one would be a good one?
|
Replies:
Posted By: OOshanis
Date Posted: 16 June 2006 at 2:19pm
|
the search would tell you also...most people like to use the palmers male stablizer, which you need to buy a vertical adapter for, it allows you to put the stabilizer as a foregrip another that people like to use, as to not show off as much, is to get a female stabilizer, which replaces the ASA where the C02 or HPA screws in its really just personal preference ------------- 
|
Posted By: cus98tom
Date Posted: 16 June 2006 at 2:22pm
| you can get the "MALE" , you will also need to get a vertical adapter, or you could get a "female" that mounts inplace of the ASA , using your same braided line. |
Posted By: Bruce A. Frank
Date Posted: 16 June 2006 at 2:28pm
Check out my comments here: http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=156 226&PN=1 - http://www.tippmann.com/forum/wwf77a/forum_posts.asp?TID=156 226&PN=1 About the sixth post down the page. -------------  
|
SRG.Slims wrote:Posted By: SRG.Slims
Date Posted: 16 June 2006 at 2:34pm
|
the page says that page can not be desplayed
|
Posted By: casper8x
Date Posted: 16 June 2006 at 6:38pm
|
A Model 98 female kit is available for $99.00. Its everything you need minus a gauge if you want. https://palmer-pursuit.com/ecom/product_info.php/cPath/56_53 /products_id/48?osCsid=33680737977c41afde46363339cdfe8b If that link doesn't work the part number is... TIPP9815 Stabilizer Female 98 kit ------------- Milled & Cut 98Custom A.P.E. Board Polished Int. Palmer's Stab. Apex mounted on C.P. Classic Center-Fed Halo B |
Posted By: hybrid-sniper
Date Posted: 16 June 2006 at 6:42pm
Linky no worky. Really, you can't go wrong with a male or a Female. |
Posted By: Bruce A. Frank
Date Posted: 16 June 2006 at 6:45pm
That is odd! Try this: Expansion Chamber Vs Regulators Again, about the 6th post down the page. -------------
|
Posted By: SRG.Slims
Date Posted: 16 June 2006 at 7:29pm
|
ok so the co2 screws in to the female one right??
|
Posted By: Skillet42565
Date Posted: 16 June 2006 at 7:32pm
Si. ------------- 
|
Posted By: SRG.Slims
Date Posted: 16 June 2006 at 7:42pm
|
ok so then i have a x-chamber could i have the x-chamber on and the female or is that like stupid. Also say i got one of the ps and use co2 then i swiched to hpa it would still work find then right? |
Posted By: hybrid-sniper
Date Posted: 16 June 2006 at 8:01pm
|
It's always nice to have an extra layer of protection after the Stab. It will still work after you get HPA, but the X chamber will be rendered useless. |
Posted By: Bruce A. Frank
Date Posted: 16 June 2006 at 10:03pm
The xchamber would need to go on before the Stabilizer to allow "expansion" to gas before it reaches the regulator. Pretty hard to do with a female Stab. -------------
|
Posted By: hashi2008
Date Posted: 17 June 2006 at 12:54am
|
Female+mounts= less than $100 but if you have a remote line, you can hook up an inline regulator for about $65. ------------- Founder of the "Forumers Against the Ugly Woman Sigs" also known as FAUWS. |