http://imageshack.us">

http://imageshack.us">

http://imageshack.us">

http://imageshack.us">

UPGRADES:(front to back)

• 12in cpro barrel(soon to be 12in J&J 2-peice exactly like thorngravy's)-(black)=$15
• habo b w/ rip drive and victory board-(smoke)=$150
• new hardware-(polished aluminum)=$10(all of it) 
• rufus dawg wickedbolt-(obviously black)=$30
• rufus dawg center feed-(clear)=35
• lpk-(black)=$100
• ccm reg-(black)=$40
• macro-(black with polished 90's)=$15  
• brass 3-way conector-(brass)=$5
• bob long 600psi guage-(black/polished)=$15
• palmers old style lpr(for the e-bolt)-(black)=$15
• drop/cradle w/ on/off-(black)=$25
• rufus dawg stick trigger w/ stop-(black)=$20
• 48cu/3k pure energy tank w/reds cover-(black)=$80
• dye stickys(soon to have tippmann screwed dm5 grip(black)-(clear now)=$10

E-BOLT CONSISTS OF:

• gta ram-(black)=$40
• milling on the sleeve(mod)
• 2-wayed(mod)
• eclipse qev's(on both of em)-(black)=$20
• shorten'ed stroke(mod)
• harness w/25g micro switch(idk)=$20
• bob long solenoid w/ extended wires & 90 barb-(white/black/gold)=$60
• dm style led predator board-(lots-o-colors)=$70
• relocated battery(mod)
• micro line-(clear)=$5
• custom milled seal(INSIDE THE RAM CAP!!!)

MODS:(front to back)

• custom paintjob-(white/black)=$20
• custom milled centerfeed(ALOT of work)
• milled foregrip
• double ball detents=$5(both new) 
• XTREME milled sightrail
• milled velocity lip
• cut drop
• quick strip recievers
• filled in screw whole
• XTREME light pen spring
• no safety
• screw in safety whole
• XTREME MILLED INER GRIP
• cut whole for led
• relocated screw(LIKE ALL THE WAY BACK)
• $1 bill for faceflate on the hopper(light is in the forhead, its cool)-$1

subtotal=$796

gun=$230(starter kit)

GRAND TOTAL=$1031

and after i get the new barrel and grips=$1100

tell me what u recomend and think of it, no flaming in this thread!!

ID LIKE TO MAKE A SHOUTOUT TO THORNGRAVY- THIS THREAD WOULDNT OF HAPPENED WITHOUT HIM, HE DID LIKE ALL OF THE WORK,LOL ......THANK U MAN

yay!!! awesome dude

nice

got a vid?

I've been waiting for this.

That is such an amazing gun. Nice job!

how fast can it shoot? vid?

Very nice looking Tippy. Vid?

nice

idk how to do a vid guys, or sound clips.

hey glazener: the paint isnt chipping off, i just didnt paint the edjes in yet. and that screw by the bottom o-the grip was collored in by a sharpy a while ago, i know i need to clean it off with some lacker thinner.

I KNOW EVERYONE, I NEEEEED GRIPS.

hey blackdog144:got a link to the one thats better, dont give me a link to prea's gun on model98 or nn's gun, i know about those already, the only major dif is that those have eyes, i cant really afford eyes and dont want to mess wit em, i dont mind taken mine apart at the end o-the day and cleanin out 2 chopped, thats ok to me. eyes for this board is $40, i dont think $40 is worth 2 chopped balls!!

any more coments or sugestions?

oh, and for everyones info, in that last pic, the grips tor up the paint.

it was cut bad cuase its not realy visible, and i didnt have time, i had to leave town and i wanted the paint to be done when i got back.

I would highly recommend powdercoating your body.   It is pretty inexpensive to have done and paint ALWAYS chips or melts, even if you fire it.   Oh and don't forget to have them do the nuts for the rt. side receiver half.

Other than that, you need to do some cleaning up... alot of jagged cuts under the hand grip, dremel them smoother and make them look like they are supposed to be there.   Cosmetics are just as important as function when trying to build a showpiece.   I'm not a big fan of the LPR with the micro-line hanging in mid-air, but that is up to you.

Its getting there...

~ Rico

PS... stop paying retail!!!!!   If you truly have $1000 into your marker, then you need to immediately seek psychiatric treatment.

Rico's Revenge wrote: I would highly recommend powdercoating your body.   It is pretty inexpensive to have done and paint ALWAYS chips or melts, even if you fire it.   Oh and don't forget to have them do the nuts for the rt. side receiver half. Other than that, you need to do some cleaning up... alot of jagged cuts under the hand grip, dremel them smoother and make them look like they are supposed to be there.   Cosmetics are just as important as function when trying to build a showpiece.   I'm not a big fan of the LPR with the micro-line hanging in mid-air, but that is up to you. Its getting there... ~ Rico PS... stop paying retail!!!!!   If you truly have $1000 into your marker, then you need to immediately seek psychiatric treatment.

first off, he doesnt have an r/t

second.. u act like he took $1000 and just spend that within a year, and it was over the course of 5-6 years..

theres nothing wrong with that.. he just loves paintball and wants to show everyone that u dont need a gun like an angel or dm6 to play speedball!

thornygravy wrote: first off, he doesnt have an r/t second.. u act like he took $1000 and just spend that within a year, and it was over the course of 5-6 years.. theres nothing wrong with that.. he just loves paintball and wants to show everyone that u dont need a gun like an angel or dm6 to play speedball!

"First off..." know what you are talking to before you decide to talk smack.   There is a difference between rt. (right) side receiver half and an R.T. (response trigger)

"Second..." even if it was over a few years, it still shouldn't cost him $1000.   I had about $700 into mine built very similar with a DM5 board w/ WAS chip that I spent a few years on as well.   My point is that retail prices suck.

I never said anything negative about what he is trying to do.   Maybe you should try to figure out who you are talking to before you decide to pop off.

Added Equipment:

-                       GTA E-Bolt

-                       GTA Comp-Air (LP) System

-                       WGP Black Magic Regulator

-                       GTA Double Trigger

-                       Freak Barrel System

-                       Halo B with Z-code and Rip Drive

-                       White Pearl .45 Grip Panels

-                       Paintball Inc. Drop Forward

-                       Quick Strip Stainless Thumbscrews

Modifications:

-                       Raised “TIPPMANN 98 CUSTOM” Milled Off

-                       Rear Sight Milled Down

-                       Center Feed w/ Clamping Hedlock

-                       E-Bolt Battery Relocated to Drop

-                       DM5 Board with WAS Equalizer

-                       Blow Back Vents Drilled into Body

-                       Blow Back Vents Drilled into Elbow

-                       Polished Internals

-                       Custom Chrome Graphics

-                       “Black Gold” Paint and Clearcoat

-                       Rear Trigger Stop (Adjustable With Set Screw)

-                       Front Trigger Stop (Also Adjustable)

-                       Magnetic Trigger Return (Return Weight Adjustable)

-                       E-Bolt Movement Sealed

thornygravy wrote: lol i feel like an idiot, but thats ok.. ill challenge who ever i want.. will i win? probably not.. but its worth a shot.  (i like confrentation)

I wouldn't advise being so confrontational, you already have 2 strikes in a short time.  Nice marker, be nice if he could so something different with the microline to tidy it up.

JohnnyCanuck wrote: I wouldn't advise being so confrontational, you already have 2 strikes in a short time.

thx for the advice i guess.. w/e happens happens, i could always make a new name

thornygravy wrote: *pwnage

Very nice gun.

hey guys, no more flaming man....geeees, and when the paint was put on outside it started rainin, o-well, u know i tried. 

half way thru doin the bodywork i saidim building a paintball gun, i dont have a glass case for it, i use it.

guys, this gun has been apart for......3 years so ive had enough of it bein apart, it works now that thats just fine

Rico's Revenge wrote: thornygravy wrote: first off, he doesnt have an r/t second.. u act like he took $1000 and just spend that within a year, and it was over the course of 5-6 years.. theres nothing wrong with that.. he just loves paintball and wants to show everyone that u dont need a gun like an angel or dm6 to play speedball! "First off..." know what you are talking to before you decide to talk smack.   There is a difference between rt. (right) side receiver half and an R.T. (response trigger) "Second..." even if it was over a few years, it still shouldn't cost him $1000.   I had about $700 into mine built very similar with a DM5 board w/ WAS chip that I spent a few years on as well.   My point is that retail prices suck. I never said anything negative about what he is trying to do.   Maybe you should try to figure out who you are talking to before you decide to pop off.

I thought you meant Response Trigger too. Alot of people don't put the "/" between the R and T. It would be easier to just type in the "igh" in right and avoid any confusion.

__________________________________________________________

"Maybe you should try to figure out who you are talking to before you decide to pop off."

Wow, who the hell do you think you are? So he (and I) misunderstood you. You could have been alot clearer. Seriously, who abbreviates right? It's 5 letters long. Just because you have been around here longer doesn't mean you are better than any other member in here. Don't try to look like you're tough **edited** on the internet, it just doesn't work.

if u look close its a square nut!! it wouldnt work with the screws i had for my drop and it did work with the ones i used holding the gun together.if u look close that screw is ran throught the safety whole and thats where the square nut is.

and just so people stop arguing about the prices, those r not retail, i bout probably 7/8 of the stuff off ebay, like i listed that i got "A boblong solenoid", well i got "2 boblong solenoid(s)" for 55. and since when does the price matter to anyone else, i paid for it, i also didnt list i got (2) rams for $40, instead of just (1).i get deals here and there, but when i buy somethin i need for the gun to work good, i realy dont care how much i pay.

p.s. no avence rico's revenge, thorngravy knows a whole lot about me and this gun considering that we've been talkin to each other for awhile now, so i realy dont care if he talks for me, hes got the story straight.

And just to remind everyone, im only 13 YEARS OLD, SO ITS NOT GONNA LOOK THE BEST!!!!!!!

O and about that hose thing, i couldnt find a 90degree elbow for the palmers lpr, it has oddball threadsi wanted to run it up along the lpr the along the trigger fram then into the gun, trust me, it would look alot cleaner if i could find a 90 fo it.

FA22RaptorF22 wrote: Trust me, some advice pimpin....learn to ration your money early...because you are going to need it later.  Don't find out the hard way.  But you'll find out it was a waste to throw that much money in so early.  Nice gun btw.  Just keep it cheap.  It will help you in the long run. Hey you have another ram right?  Do you want one of the qev standoff things?  like on mine so you dont have to destroy a ram... Red marks stand off...my ram...looks good eh? http://imageshack.us">

hey guys, i know how to manage my money alot better after this , try but to find a dm style led predator board for cheaper than 70....its very hard. i only bought the best stuff fo my gun so i would never have to worry about the part breaking.

thanks but i do not want a stand-of like that cuase

1: 2 more posibilties of leekin there

2:if i grinded it down it would be more snug

and 3:i dont think it looks very good with a qev stickin offa the bottom, imo my ram flows slightly better.

but yes, u have a point about that, it does make the ram look cleaner.

pm me bout those grips, im very interested, i bought these for like $5 as u can tell

Anxiety wrote: im not gonna lie to you.. ur a huge idiot to put that much money into a tippy.. you should sell that and buy an fs8 or sumthin sweet like that

...im not going to lie to you

because of that right there i dont like you at all, you know nothing about tippmanns with ebolts, it makes them a high end electro gun

pimpin did a great job and you should just keep your mouth shut

Anxiety wrote: im not gonna lie to you.. ur a huge idiot to put that much money into a tippy.. you should sell that and buy an fs8 or sumthin sweet like that

That's not as easy as it sounds, my ebolted 98 just won't sell.

OOshanis wrote: ...im not going to lie to you because of that right there i dont like you at all, you know nothing about tippmanns with ebolts, it makes them a high end electro gun pimpin did a great job and you should just keep your mouth shut

bravo

and btw, he paid for that gun himself.

S\/\/4T-L()G4N wrote: Through an allowance?

You don't know anything about this guy, so just shut up.

thanks guys for tellin him

fo the record, im payed off on this thing.

and i did alot o work and side stuff to get this money, i had 2 years to get it togther so i got the money

$10 fo allowance every week, so that works

thank u guys for the coments(most of u anyways)

anything else anyone would like to say

thornygravy wrote: i believe its 27-32 bps

Not with that ram the way it is.

no thorngravy, thats what FA22RaptorF22's bps is saposed to be,

it want it to do around 25 w/fast ramping, i dont realy care for more

and i have a qeustion for JohnnyCanuck:

why wouldnt my ram be able to do that, thats the most u can upgrade a ram, i forgot to list i shortened the stroke too!!!!!, its like 1.35in now!!??? i am positive that the shortest stroke on an e-bolt ram was 1.33in, im damn close to that.

p.s. how old r u frobs??

need some touch ups but..i like it. nice work.

PaintballPIMPIN wrote: link??

I would like to see it as well.

 I can't explain how much I want to kill you and take your peice of holy goodness for my own.... I love it.

note- not going to kil him just like his gun alot.

thanks fo the coment

anybody have a sugjestion on how long of a barrel i should get??

12-14, get mine

hey ravengaurd, please tell me how those screws are ghetto, they wont strip like the screws that originaly come with em, the one at the bottom of the grip was collored with a sharpy before i painted it, it was mocked together when i took the pics, all the screws are stainless and shiny now:

how else am i saposed to hold the micro line up or run it a dif route when the barb it coming outta the hole in the grip, the zip ties are there to make sure it stays outta the way.

and another question: how would it tie everyother e-bolted tippy, theres no way in hell that its a stock ebolt, not to mesnion ever other mod and up it has.

cuase i striped my other ones, and seeing my father and i work on cars in our back garage hes got some hardware, so i found those in there and they worked, so i said why not.

ill see if i can post pics later on(as in monday) reason bein im goin on vaca. in 2 hours

what exactly of the iners do u wanna see?? like the e-bolt area?? do u wanna see it bald(stuff takin out in that area) ugotta tell me what, but im not gonna disasemble much to let u know

i must say that building your own E-Bolt is impressive, with that being said i am not impressed with the craftsmanship overall. the bolts suck, cuts under the grips are terrible, paint lines , hoses running in mid air, hose clamp for battery. with a few more hours all of these issues could have been addressed and made to really look professional! in your defence you say this gun was built for performance but you don't even have the volumiser on the LPK, that is a very important part of the LPK, without it i don't think you will get the performance you desire. only being 13 is no excuse for overlooking these important details IMO, if you take on a project like this you should want it to turn out as good as possible, performance wise and looks.

rating

performance 8/10 (because of missing volumiser)

looks 2/10

originality 10/10

attn. to detail -50/10

effort 50/10

don't get me wrong i think you taking on such a huge project at the age of 13 is awesome, but if you truely did have the gun apart so long what would it have hurt to take another week to resolve all of the issues i mentioned? you can have the fastest gun in the world but if it looks like crap it's just a fast gun, take that same gun and make it beautifull now you have a fast gun that everyone wants!

WOW,, i like,, great job!!

dsop: why sure u can, go ahead; what site??

fa22raptorf22: i do not what so ever take your last coment funny

right about now i want a moderater to come and delete this thread, i am sickined on some of ur guys expretions, that makes me fell like crap!!!