Upgrades and Customizing - J and J Grip Frame

Print Page | Close Window

J and J Grip Frame

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=157488
Printed Date: 11 April 2026 at 3:22pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: J and J Grip Frame

Posted By: tippya5extreme
Subject: J and J Grip Frame
Date Posted: 16 July 2006 at 11:39pm

i found this online. its been out there long but i thought of something.

http://www.chasepb.com/store/product1.aspx?SID=1&Product_ID=336&Category_ID=10 - http://www.chasepb.com/store/product1.aspx?SID=1&Product _ID=336&Category_ID=10

i looked at this and wondered if this can support the egrip.

this would solve the sticky problems. you could put diffrent ones on if you want

-------------
http://imageshack.us">

tippya5extreme

Replies:

Posted By: tippya5extreme
Date Posted: 16 July 2006 at 11:52pm

i found it.

http://www.pbreview.com/products/reviews/2178/ - http://www.pbreview.com/products/reviews/2178/

it looks ok. it says that is has the cutout for the e and timer.

-------------
http://imageshack.us">

tippya5extreme

Posted By: Dan db09
Date Posted: 17 July 2006 at 12:02am

If you did that before you posted then you wouldn't off need to post a thread.

Posted By: killswitch43
Date Posted: 17 July 2006 at 8:47am

where do you see it's compatible with the e-grip?

Posted By: sinisterNorth
Date Posted: 17 July 2006 at 8:53am

Everyone on pbreview had a RT. I saw nothing about the Egrip...

-------------
Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good.

Posted By: tippya5extreme
Date Posted: 17 July 2006 at 10:38am

sinisterNorth wrote:

Everyone on pbreview had a RT. I saw nothing about the Egrip...

Period of
Product Use:

Less than a month

4 of 5 people found this review helpful.

Paintball
Experience:

2 years

Similar
Products Used:

stock grip frame

Marker Setup:

Tippmann A-5 w/ RT, Dead On RVA, Pro Seal, Pychobalistics Drop Forward, J&J .45 Grip Frame

Strengths:

Aluminum instead of plastic
Compatable with .45 grips
comfortable
Battery slot for grips w/ timers

Weaknesses:

trigger wiggles left to right
scratches fairly easy
RT piston is molded into frame

Review:

This product does just what it says, replaces the stock grip-frame with a more durable and comfortable one. To install all you have to do is take off the stock grip frame. Next take out the safety and remove the trigger assembly, pull the trigger plate off, remove the trigger and take out the trigger return slide, return slide dowel pins, and trigger return slide spring out of the trigger; pop those into the aluminum trigger and put that on the trigger plate pins where the stock one was. Add the trigger plate, put it back into the grip, and push the safety button all the way through and put it on your A-5 and your ready to play! Be careful when placing grip frame on marker if you have an RT installed, or you may scratch the U where the RT adjuster rests. Another thing is the RT piston is molded into the frame, so if you have any problems with the piston you have to replace the whole frame. You get the same BPS, or at least I havn't noticed any difference. Trigger pull length and weight is about the same. One thing that you may want to do would be add a pad where the RT piston hits the trigger, so it does not scratch or dent. The trigger will wiggle a bit to left or right, but only if you push it.

Conclusion:

This is a great product for feel, durability, and look. The only reason I am rating it a 9 is because the RT piston did not extend to allow response mode. All in all I would recomend this upgrade to everyone. This is a great upgrade for a great marker!!!

Rating:

9 out of 10

is that a board? or is that just a sticky that uses a battery

-------------
http://imageshack.us">

tippya5extreme

Posted By: killerwhale
Date Posted: 17 July 2006 at 12:18pm

pm a mod or a platty

usually they know stuff like that and could help you

-------------

AHHHH!!!!!!!!!!