A5 cyclone feed mounts broken
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=158129
Printed Date: 12 March 2026 at 10:13am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: A5 cyclone feed mounts broken
Posted By: elementfmfl
Subject: A5 cyclone feed mounts broken
Date Posted: 02 August 2006 at 4:18am
| hello anyone replaced the pins on the cyclone feed side? if you remove the cyclone feed by the allen head bolt there is two pins that come out of the marker frame and stablize the cyclone feeder the bolt runs in the middle. My two pins have broken off for some reason and I am wondering if these are just push in or part of the marker frame and also how to repair them? any help would be greatly appreciated Thanks |
Replies:
Posted By: cus98tom
Date Posted: 02 August 2006 at 3:02pm
|
They are part of the frame, You will have to purchase a new right side frame. http://www.tippmannparts.com - www.tippmannparts.com , http://www.countypaintball.com - www.countypaintball.com |
Posted By: Enos Shenk
Date Posted: 02 August 2006 at 5:46pm
|
Do you have a drill? Doesnt seem like they would be very hard to rig up a replacement. File down the stubs of the old pins, center punch them, and drill them out to a size that will fit some metal rod to replace the pins. You can find basic steel and brass rod at hardware stores. It wouldnt be too hard to epoxy them in place. ------------- 
|
Posted By: elementfmfl
Date Posted: 03 August 2006 at 2:00am
| Thanks I will give that a try |