new halo b...oh and my ion..again
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Marker Gallery
Forum Description: Show us your guns!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=158280
Printed Date: 11 July 2025 at 4:24am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: new halo b...oh and my ion..again
Posted By: blackdog144
Subject: new halo b...oh and my ion..again
Date Posted: 05 August 2006 at 1:14pm
|
well yesterday a friend and i went to our local paintball store...i brought 120 bucks with me just in case of things. I origanlly went there to have the guy check out my ion and tell me how to change the rate of fire and how to change the mode your on. He wasnt much help, but he did set my rate of fire. Im still sort of confused on how to change the mode though. anyway, I ended up buying a Halo B.   ya i know you have all seen a Halo B before. But i got it and i wanted to well show you guys i guess............anyway question. Why wont it fit in my stock ion feedneck? I want to use this gun today cause im going paintballing, but it just wont fit. How can i make it fit? and it also wont fit in my custom pros feedneck either.... ------------- http://imageshack.us">  
|
Replies:
Posted By: usafpilot07
Date Posted: 05 August 2006 at 1:38pm
|
Halo feednecks are really large. You have two options. 1) (best way to do it) Look inside the feedneck on your ION. Alot of them have two Orings inside, pull those out, now it should work fine. 2) If you've already done that before, and it still won't fit, take some sand paper and work evenly around the feedneck of the halo. 3) 4) Profit ------------- Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo |
Posted By: blackdog144
Date Posted: 05 August 2006 at 1:51pm
|
im going to eventually buy a new clamping feedneck but for right now i want to use my ion today but i dont know if i can...
------------- http://imageshack.us">
|
Posted By: pattison
Date Posted: 05 August 2006 at 2:33pm
|
damn underpants gnomes ------------- Eat The Brisket |
Posted By: barn_user
Date Posted: 05 August 2006 at 3:18pm
| Beat it into submission with a big hammer. |
Posted By: usafpilot07
Date Posted: 05 August 2006 at 3:36pm
Then do what I told you to... ------------- Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo |
blackdog144 wrote:Posted By: blackdog144
Date Posted: 05 August 2006 at 7:58pm
|
i did do what you told me to do, but it didnt work...so im just going to have to wait...i used my custom pro today which is basically dead...
------------- http://imageshack.us">
|
Posted By: usafpilot07
Date Posted: 05 August 2006 at 9:09pm
|
Did you sand the feedneck down? I've never seen an instance where that didn't work.
------------- Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo |
Posted By: Bird-Dog
Date Posted: 05 August 2006 at 9:17pm
|
Yea, idk how that wouldn't work. Maybe you just dont wanna sand on your new baby? Cause it can't really be that much larger. ------------- 
_Bird-Dog_ |
Posted By: blackdog144
Date Posted: 05 August 2006 at 11:18pm
|
Bird-Dog you basically said it...i really dont want to sand down on something i paid 100 bucks for at the moment...ive talked to alot of people and they sanded theres down, but i guess you can say...im not ready to...
------------- http://imageshack.us">
|
Posted By: TEHGANGSTER
Date Posted: 05 August 2006 at 11:47pm
|
hmmm, i think you can sand it
------------- 
I am a leaf on the wind, watch how i soar. |
Posted By: blackdog144
Date Posted: 06 August 2006 at 1:05am
|
maybe i should....
------------- http://imageshack.us">
|
Posted By: Bird-Dog
Date Posted: 06 August 2006 at 1:30am
|
Just get your new feed neck as soon as possible and you won't have to worry about sanding it. -------------
_Bird-Dog_ |
Posted By: blackdog144
Date Posted: 06 August 2006 at 2:01am
|
ya im waiting for my dad to cash in my check first...294 bucks...i worked 24 1/2 hours last week...hard work but i got good money so ya...thats what i should do...
------------- http://imageshack.us">
|
Posted By: sinisterNorth
Date Posted: 06 August 2006 at 11:05am
|
Just wait and buy a Q-lock asap. ------------- Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. |
Posted By: ^Pirate^
Date Posted: 06 August 2006 at 11:18am
Or if you don't have one try for a can-opener or a rear naked choke to it's neck should work too, just make sure it submits.... ------------- 
It aint about black or white becuz we human I hope we see the light before it's ruined My ghetto gospel |
Posted By: blackdog144
Date Posted: 06 August 2006 at 11:23am
|
will do
------------- http://imageshack.us">
|
Posted By: KoolKidsKlan
Date Posted: 08 August 2006 at 11:57pm
|
Get the feedneck, then it will fit perfect. ------------- 
|
Posted By: RoboCop
Date Posted: 09 August 2006 at 12:07am
| Ok, I don't see how it won't fit in the custom pro's feedneck. Mine fits perfect. Just make sure that on the custom pro that the bolt is screwed out far enough to let the Halo slide in. I love my CCM feedneck on my Ion so I would highly suggest that. |
Posted By: Mehs
Date Posted: 09 August 2006 at 12:48am
|
Just sand it, really not hard at all, and it will have an awesome tight fit.
------------- [IMG]http://i27.tinypic.com/1538fbc.jpg"> Squeeze Box ☣ |
Posted By: blackdog144
Date Posted: 09 August 2006 at 2:08am
|
this friday before i paintball im going to buy a feedneck...but ya it wont fit in my custom pro...
------------- http://imageshack.us">
|
Posted By: meteora
Date Posted: 09 August 2006 at 2:15am
|
How to change the modes: http://imageshack.us">  "Programing:
· First, select which adjustment mode you want by the LED pattern and color. For example, to increase dwell select solid yellow. · The power button is used to adjust the setting. It will adjust it by one interval in whatever direction you sleecred (up or down). · Each time you push the power button, the opposite color LED will blink once to signify it has been adjusted one time. · As you push the power button, at some point the LED will stop blinking; this signifies you have reached the maximum/minimum setting. · To exit the programming mode, push the trigger once. After pushing the trigger, turn the board off to save the settings. If you pull the battery, the new setting will revert back to whatever it was last set to. Fire Mode: LED double blink The stock board is equipped with four(4) fire modes, in this order from highest to lowest: Fullyautomatic Three-shot burst Rebound (ramping) Semiauto" Taken from zds paintball. ------------- http://imageshack.us"> 
GUN WHORE XTC |
Posted By: blackdog144
Date Posted: 09 August 2006 at 3:27pm
|
ya the guy at my locals pb shop did it for me, but he didnt say how to change modes as in from semi to full auto and whatnot...so im still some what confused on that part...
------------- http://imageshack.us">
|
Posted By: Hairball!!!
Date Posted: 10 August 2006 at 12:59am
| I thought that said frog |
Posted By: blackdog144
Date Posted: 10 August 2006 at 2:22am
|
thats what i thought first but ya not anymore...
------------- http://imageshack.us">
|
Posted By: bvsnbtthd
Date Posted: 10 August 2006 at 2:35am
|
save the $. sand it. ------------- stick it 2 da mann |
Posted By: blackdog144
Date Posted: 10 August 2006 at 11:24am
|
my friend had a good idea..yesterday when he came over we didnt sand my halo b, we sanded the inside of the feedneck, it fits good now...but im still getting a new feedneck..
------------- http://imageshack.us">
|
Posted By: Boo bear 2
Date Posted: 16 August 2006 at 5:35pm
|
nice
|