98 gun stand
Printed From: Tippmann Paintball
Category: Tippmann Paintball
Forum Name: Marker Gallery
Forum Description: Show us your guns!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=158924
Printed Date: 28 February 2026 at 8:42am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 98 gun stand
Posted By: Lightningbolt
Subject: 98 gun stand
Date Posted: 22 August 2006 at 9:28pm
|
So I've been on a gun stand kick. Finally got around to putting the 98 back together. This one was alittle tougher because the balance point on the gun is so far forward.
|
Replies:
Posted By: spikerz627
Date Posted: 22 August 2006 at 9:48pm
|
nice simple ------------- http://imageshack.us"> 
|
Posted By: Snick
Date Posted: 23 August 2006 at 9:36am
|
kinda cool, though I would paint the stand so it goes along with the darker color of the marker, as it is the stand takes the attention away from the marker because of the bright color in comparison to the gun -------------  
|
Posted By: pbdude985
Date Posted: 23 August 2006 at 5:11pm
|
nice stand, simple yet effective ------------- 
|
Posted By: estcstpnt
Date Posted: 23 August 2006 at 7:39pm
|
That term is waaaaay to overused. Anywho I like the stand. The paint on the gun is pretty nice ------------- Thinking about it... |
pbdude985 wrote:Posted By: a5Tpp789
Date Posted: 24 August 2006 at 1:31pm
|
simple yet effective -------------  if you put 500 dollars into an A5 it is still an A5
|
Posted By: sinisterNorth
Date Posted: 24 August 2006 at 1:46pm
|
Not too shabby. ------------- Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. |
Posted By: dirtbike14455
Date Posted: 24 August 2006 at 3:09pm
| can I steal your idea, I need to make some gun stands for an up comming event that will work for 98s. Is it just a PVC pipe glued onto a piece of wood? |
Posted By: SSOK
Date Posted: 24 August 2006 at 3:36pm
|
I would paint the stand like somebody already said ------------- 
|
Posted By: Lightningbolt
Date Posted: 24 August 2006 at 4:19pm
|
There's a 2" x 2" block of wood inside the pvc that's screwed to the base. the angle cuts are 15 degrees. |
Posted By: dirtbike14455
Date Posted: 24 August 2006 at 6:06pm
| thanks alot |
Posted By: Lightningbolt
Date Posted: 24 August 2006 at 9:40pm
| dirtbike. I notched the pcv to accept the bottom of the receiver too. A stone wheel on a bench grinder works good for this. |
Posted By: Cyberdemon
Date Posted: 25 August 2006 at 9:13pm
|
i guess its cool and i like the paintjob. is that thing a co2 tank in the shape of a stock? ------------- http://imageshack.us"> 
|
Posted By: TEHGANGSTER
Date Posted: 26 August 2006 at 12:06am
kool!  ------------- 
I am a leaf on the wind, watch how i soar. |
Posted By: meteora
Date Posted: 26 August 2006 at 2:34pm
i lol'd at that. No its kinda like a really long asa, the plug on the right side is a quick disconnect "thing" and you hook your remote or whatnot up to it allowing air to flow through, but also allowing you to have a stock. ------------- http://imageshack.us"> 
GUN WHORE XTC |
Posted By: XtippXmannX
Date Posted: 26 August 2006 at 2:55pm
| swweet |