Gun Maintenace and Repair

Print Page | Close Window

weird egrip?

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=158988
Printed Date: 11 April 2026 at 5:24am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: weird egrip?

Posted By: soulfly1
Subject: weird egrip?
Date Posted: 24 August 2006 at 11:00am

Hey guys.

Its been a while since ive been on but im back. And I have a problem with my egrip. No matter what setting I have it on or how low I set the firing rate, when I hold the trigger for any amount of time, (even for just one second longer then i should), it acts like its in full auto and fires like crazy. So I have to quickly tap the trigger to fire one ball, which sucks. And the other problem is that the cyclone doesnt keep up to that rate of fire, is there anything I can do to adjust those two problems. Any help would be appreciated!

Replies:

Posted By: ollieb
Date Posted: 24 August 2006 at 11:45am

Is it the WAS board and did you install a double trigger? If so I'll bet you didn't take the metal tab off of it.

Mine kept doing the same (even firing with the safety on or a jolt) and after several calls to tech support, a new rear bolt and sear they finally asked me to send mine in so they can take a look at it.

Posted By: soulfly1
Date Posted: 24 August 2006 at 12:14pm

Its just the stock board with a double trigger on it. I didnt know about the metal tab. Ill give that a try.

Posted By: Tomk
Date Posted: 26 August 2006 at 6:03pm

ollieb wrote:

Is it the WAS board and did you install a double trigger? If so I'll bet you didn't take the metal tab off of it.

I have the same problem, what do you mean by "the metal tab"

can you please lighten this up for a total newbie ?

Regards

Tom

Posted By: soulfly1
Date Posted: 01 September 2006 at 1:32pm

The metal tab he means is the tab on the trigger itself. Theres a silver piece of metal on the trigger that you have to push the pin out and the the tab and spring will come out. Then youre problem is solved!

Posted By: Shadow5
Date Posted: 07 September 2006 at 12:50pm

Does this really solve the problem if you remove the metal tab? anyone do this?

Posted By: ollieb
Date Posted: 08 September 2006 at 12:35pm

Yes it did for mine. In the installation instructions for the double trigger, the fine print at the bottom tells you to remove the metal tab if you have a WAS Board.