palmer stabilizer
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Upgrades and Customizing
Forum Description: Trick it out!
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=160290
Printed Date: 17 September 2026 at 9:46pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: palmer stabilizer
Posted By: tippy055
Subject: palmer stabilizer
Date Posted: 02 October 2006 at 11:24pm
|
I have a 98 custom and I'm gonna install a Palmer stabilizer. I'm not sure which type to get. I was thinking of getting the in line and putting it on my remote tank and leaving the tippmann x- chamber in place but Palmer said I should remove the x-chamber. They said I could get the A-5 stabilizer kit and use my vertical adapter but it seems like the line would be in the way. Anyone have any ideas of which type I should install? Do I need to remove my x-chamber ?? Thanks for any help Steve ------------- 98 custom polished internals cyclone super r/t Qev 14' j&j cer. empire 7 pc barrel kit remote setup 20 oz pure energy (anti siphoned) Palmer Stab special ops vest JT specta 8 camo mask |
Replies:
Posted By: Jawa_Nz
Date Posted: 03 October 2006 at 5:05am
|
Having both the x-chamber and the palmers is kinda useless. Get rid of the x-chamber and do as the man says. The line should run to your ASA from the vert mount no problems. The line might be in your hands way possibly as a front grip, you could chuck a second oring in so that it has the line off to the right and not in the way. You could run it from your remote but still remove the x-chamber. ------------- People who are organised are just to lazy to look for things. |
Posted By: FyreFly
Date Posted: 03 October 2006 at 7:52pm
|
Get a male and use it in place of the x-chamber. ------------- 
System X NME LE WGP Orracle Cocker Tippmann A-5 E-Grip & LPK Tippmann 98C Flatline & LPK |
Posted By: tippy055
Date Posted: 03 October 2006 at 8:54pm
|
what length and type of hose should I use between the stab and the asa?? Steve ------------- 98 custom polished internals cyclone super r/t Qev 14' j&j cer. empire 7 pc barrel kit remote setup 20 oz pure energy (anti siphoned) Palmer Stab special ops vest JT specta 8 camo mask |
Posted By: Mr. Blonde
Date Posted: 03 October 2006 at 10:07pm
|
Time to go Macro. I really don't see why people use braided lines...Macro is so much better, and now you can get ones that can withstand up to 2,200 PSI (THEY WILL NEVER BREAK), just buy a foot long, cut it to what you need....If you have enough money for the Palmer, throw in a macro kit for what? $20?
------------- -Tippmann A-5 -Flatline + Metadyne Shroud -R.I.S. Foregrip -X-Core -JCS Aluminum Powertube -JCS Hexagon Bolt -Q.E.V. -Vortex -E-Grip -Shocktech Drop\On\Off ASA -Macro-Line -Anti-Siphon C02 |
Posted By: Monk
Date Posted: 03 October 2006 at 11:43pm
| Im assuming you use CO2, I would stick with steel braided hose until you switch to HPA. CO2 can make a macro line brittle. |
Posted By: Mr. Blonde
Date Posted: 03 October 2006 at 11:53pm
Not quite.. I am right now useing Macro-Line on my A-5 but I do have an X-Core AND Anti-Siphon C02 (Whoever says C02 can't be as good as HPA needs to be glove-slapped, I can prove it's as just as good!) I have no problems and I am useing the regular HPA (850PSI) one. The only reason C02 normally breaks\cracks Macroline hoses is because the PSI amount can go up and down rapidly, by that I mean it could go up to 1,000.. which normal macrolines can't handle, that's why there are NEW macro-lines out that can stand up to 2,200 PSI (C02 will NEVER go that high so it'll never break) Either way, I would recommend getting your tank anti-siphoned like I did, but you don't have too. ------------- -Tippmann A-5 -Flatline + Metadyne Shroud -R.I.S. Foregrip -X-Core -JCS Aluminum Powertube -JCS Hexagon Bolt -Q.E.V. -Vortex -E-Grip -Shocktech Drop\On\Off ASA -Macro-Line -Anti-Siphon C02 |
Monk wrote:Posted By: tippy055
Date Posted: 04 October 2006 at 4:40pm
|
What about the palmer kit for the 98 custom? I guess my factory braided hose would work with that setup. Do they work better mounted vertical . If so I can get the male and replace my tippmann x-chamber with that and go with the macrohose. Where do you get the 2000psi macrohose from? the most I can find is 1000 psi Steve ------------- 98 custom polished internals cyclone super r/t Qev 14' j&j cer. empire 7 pc barrel kit remote setup 20 oz pure energy (anti siphoned) Palmer Stab special ops vest JT specta 8 camo mask |