Gauges
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=160502
Printed Date: 14 September 2026 at 7:25pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Gauges
Posted By: tacteam420
Subject: Gauges
Date Posted: 08 October 2006 at 11:47pm
| would i be able to add a Gauge to my tippmann and if so where would i mount it?? |
Replies:
Posted By: carl_the_sniper
Date Posted: 09 October 2006 at 1:51am
|
yeah you mean a regulator? sure, into the asa ------------- <just say no to unnecessarily sexualized sigs> |
Posted By: Mr. Blonde
Date Posted: 09 October 2006 at 2:53am
What are you talking about Carl? A gauge and reg are completly different. Yes, you can attach a gauge there should be a hole in your bottomline asa than you can make by screwing out one of the "hex nuts". If you are useing c02, make sure you get a 0-1200 Gauge, 0-850's can easily break while useing C02. I use on on my gauge and I'lll show you a pic of it *NOTE* I am useing the Shocktech drop + ASA.. I'm not actually sure if the stock ASA has the whole that I used....it should though. Here is the pic I promised. And make sure you put teflon tape on the gauges threading when you screw it into the ASA ------------- -Tippmann A-5 -Flatline + Metadyne Shroud -R.I.S. Foregrip -X-Core -JCS Aluminum Powertube -JCS Hexagon Bolt -Q.E.V. -Vortex -E-Grip -Shocktech Drop\On\Off ASA -Macro-Line -Anti-Siphon C02 |
Posted By: Mr. Yum Yums
Date Posted: 09 October 2006 at 2:15pm
|
Dont u 4get 2 put dat darn solenoid, in dat gauge buddy!
------------- I'm a cat, dur. 
|
Posted By: hybrid-sniper
Date Posted: 09 October 2006 at 6:51pm
|
Toe tally Guages are only helpful if they are installed after the second satge regulator (HPR: stabilizer for example) because it will tell you what pressure the gun is operating on. A guage on the ASA is only telling you what the output of the tank is, which is pretty much useless. Generally, guages are not used in a C02 environment. |
Mr. Yum Yums wrote:Posted By: tacteam420
Date Posted: 09 October 2006 at 10:42pm
| ic ic but i run a remote and just wanna see how much CO2 is left in my tank |
Posted By: hybrid-sniper
Date Posted: 09 October 2006 at 10:43pm
|
C02 is the same pressure until it is almost out. |