Gun Maintenace and Repair - 98 Egrip Issue

Print Page | Close Window

98 Egrip Issue

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=164362
Printed Date: 12 January 2026 at 12:46am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: 98 Egrip Issue

Posted By: combatpilot87
Subject: 98 Egrip Issue
Date Posted: 11 February 2007 at 10:22pm

I've got a slight problem.

I just purchased an e-grip for my 98 custom, and installed it myself. I connected my air source to my marker and give it a pull----all it does is fire erratically (such as when you run out of air), and then suddenly stops, and the bolt uncocks. It seems to work fine without air (it makes the ticking sounds), and I haven't tried running paint through it yet.

Any ideas? Or did I just miss something stupid in the instructions?

-------------
Tippmann 98 Custom/ACT
E-trigger/WAS
Commando Stock or M-4 CAR
Dye Ultralite
Machine Gun Shroud
Sight Rail w/CCO
Cyclone Feed
X-Chamber
PMI P-E 72Ci 3000 PSI

Replies:

Posted By: cus98tom
Date Posted: 14 February 2007 at 2:48pm

Could your ball detent(latch) be in backwards?.

Did you remove the metal band from the trigger?.

Posted By: melton8638
Date Posted: 14 February 2007 at 4:22pm

take your gun apart and make sure the sear didnt fall out of place, that happened to me

-------------
Custom Pro
Red Custom Paintjob
CP 14 Barrel
Cyclone
E-Trigger
Pen Spring Mod
Fang Trigger
CP On/Off ASA

Posted By: biohazard420
Date Posted: 15 February 2007 at 2:02am

A.Sear not in place

B.rear screws not tight enough

C.out'a air (prob not)

-------------
UpeR