X-7 Help Please
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=165245
Printed Date: 11 February 2026 at 8:50pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X-7 Help Please
Posted By: Low-Light
Subject: X-7 Help Please
Date Posted: 17 March 2007 at 11:56pm
|
I just purchased my X-7 on Thursday and took it out to the field today to have some fun. Bad thing was that it fired but the Cyclone was not turning. If I hold the marker down aiming at the ground it works perfect,...if I hold it parallel like I'm going to shoot someone it fires but the cyclone does not turn,....if I hold it straight up and shoot it sputters and dies like its not getting enough air. I disassembled it and checked the powertube, all the o-rings, the tombstone and whatnot. I didn't find anything out of the ordinary since it's a brand new marker. Anyone have any advice on this, any help would be greatly appreciated. ------------- 
|
Replies:
Posted By: Black_Shadow
Date Posted: 19 March 2007 at 2:32pm
|
is your banjo fitting seated correctly? did you disassemble the marker since you got it? if you can take it apart and reinstall EVERYTHING EXACTLY as according to you manual it should work, if you dont think taking it apart is a good idea, head for a proshop and let them have a look. Note: you sure you had co2 or air in the gun? that exactly problem can be caused by no air or co2 in your tank. if you have air/co2 then try oiling it, mabye theres too much friction in the cyclone or something like that... ------------- 98CP ACT R/T J&J Ceramic 14" Egg II w Z-Board GTA Inline X-Chamber NCStar Red-Dot Pen Spring Mod Trigger Stops Polished Internals Dye Sticky Grip 20oz Co2 w On/Off Next Up: Spimmy |
Posted By: Mauly
Date Posted: 19 March 2007 at 11:14pm
|
Are you using a stabilizer on your coil? I had the same problem and it turned out I had to increase pressure on the stabilizer, if the X7 pressure isn't up high enough the cyclone wont turn.
|