custom pro with cyclone feeder
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=165394
Printed Date: 28 March 2026 at 4:00pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: custom pro with cyclone feeder
Posted By: woodsballman
Subject: custom pro with cyclone feeder
Date Posted: 22 March 2007 at 5:23pm
|
im trying to install a cyclone feeder on my custom pro and it hasnt been going so great this project that everone I talked to said is easy has been a disaster but my question on the right side of the gun there is two holes thats were your supposed to hook the air line thinger up to the gun at from the cyclone feeder but it doesnt really specify which hole it needs to go in does this matter or does it have to be in a specific hole? right now both the holes just have screws in them so I didnt think it would matter but Im asking just to be sure ------------- tippmann custom pro E-trigger cyclone feeder 21" core barrel or 11" stock barrel 20 and 9 oz co2 tanks or Brass Eagle Talon Ghost with copperhead red dot scope and a wooden stock |
Replies:
Posted By: Ghost-Rider
Date Posted: 22 March 2007 at 7:48pm
|
In your sig it says tippmann custom pro, does this mean its a tippmann
or it was built by a pro or custom built? just wondering, sorry i had
to i got sick or ur smarta$$ comments there should be a hole on the right reciver half, punch the hole out put the line through that but you will need the banjo t fitting if you also have a R/T. ------------- 
|
Posted By: woodsballman
Date Posted: 23 March 2007 at 10:09am
|
there isnt any holes that need to be punched out theres two holes were there are already screws and the instalation instructions just said to remove a screw on the right side that connects into the valve and put the banjo fitting in but both holes go to the valve so I dont know which place to put it. ------------- tippmann custom pro E-trigger cyclone feeder 21" core barrel or 11" stock barrel 20 and 9 oz co2 tanks or Brass Eagle Talon Ghost with copperhead red dot scope and a wooden stock |
Posted By: Ghost-Rider
Date Posted: 23 March 2007 at 5:15pm
|
I belive the 2nd hole ( one closer to front of gun than rear). How cant
you get this? i did it on my 98C easy and i dont think custom pros are
that much different.
-------------
|
Posted By: tallen702
Date Posted: 23 March 2007 at 7:04pm
Alright, there should be a new powertube that came with your cyclone kit. You need to replace your stock custom-pro power-tube with that one as it has the gas-flow siphon that the gas-thru bolt threads into. When finished, it should look like this:
Note the micro-line going down to the little tube that extends from the power-tube outside of the marker? There you go. Next time, read the installation instructions, they tells you all of this. ------------- <Removed overly wide sig. Tsk, you know better.> |
Posted By: woodsballman
Date Posted: 25 March 2007 at 11:17am
|
i did read the instructions but you dont have to change the power tube for the custom pro because it already has the upgraded power tube. well mine and my friends do anyways because they both look exactly the same. ------------- tippmann custom pro E-trigger cyclone feeder 21" core barrel or 11" stock barrel 20 and 9 oz co2 tanks or Brass Eagle Talon Ghost with copperhead red dot scope and a wooden stock |
Posted By: tallen702
Date Posted: 25 March 2007 at 2:29pm
|
*sigh* the powertube on a custom pro, if it doesn't already have a cyclone or an RT on it, doesn't have the exhaust port drilled out on it. It's just a solid little piece of plastic to keep dirt and whatnot getting into the marker. HENCE, you need to change out the powertubes. ------------- <Removed overly wide sig. Tsk, you know better.> |
Posted By: woodsballman
Date Posted: 26 March 2007 at 9:09pm
|
my friend came over and put it on for me so dont worry about it anymore
------------- tippmann custom pro E-trigger cyclone feeder 21" core barrel or 11" stock barrel 20 and 9 oz co2 tanks or Brass Eagle Talon Ghost with copperhead red dot scope and a wooden stock |