Punch out Hole on 98cp
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=165615
Printed Date: 30 November 2025 at 8:51pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Punch out Hole on 98cp
Posted By: Black_Shadow
Subject: Punch out Hole on 98cp
Date Posted: 30 March 2007 at 8:25am
|
Ok, i get my RT today, ill be installing it later tonight. However i noticed i have to punch out a hole on the side of my reciever. it seems to be clearly marked, but what would be the best way to knock it out, i want to install it for saturday but between now and then i dont have access to something like a punch press or something, what would be the best ghetto way to knock it out? ------------- 98CP ACT R/T J&J Ceramic 14" Egg II w Z-Board GTA Inline X-Chamber NCStar Red-Dot Pen Spring Mod Trigger Stops Polished Internals Dye Sticky Grip 20oz Co2 w On/Off Next Up: Spimmy |
Replies:
Posted By: Bruce A. Frank
Date Posted: 30 March 2007 at 1:36pm
|
With a small hammer and a drift punch or a center punch; an old broken drill bit or even a small chisel. It is offset and lightly grooved along its parimeter. All you have to do is cleanly transfer the impact from the hammer to the knock-out section and it will break out causing no damage to the rest of the grip. Wear safety goggles!!! -------------  
|
Black_Shadow wrote:Posted By: Black_Shadow
Date Posted: 31 March 2007 at 9:10am
|
thanks bruce.
------------- 98CP ACT R/T J&J Ceramic 14" Egg II w Z-Board GTA Inline X-Chamber NCStar Red-Dot Pen Spring Mod Trigger Stops Polished Internals Dye Sticky Grip 20oz Co2 w On/Off Next Up: Spimmy |