32* Bullet drop forard
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=165830
Printed Date: 29 November 2025 at 3:54am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 32* Bullet drop forard
Posted By: michaela2z
Subject: 32* Bullet drop forard
Date Posted: 06 April 2007 at 2:12pm
|
Hi. In the on off valve of a 32* Bullet drop forward how much does the pin stick out the threaded screw so that it can push the pin valve of the air bottle. Ive got one and always used co2 with a valve on the bottle but im now air and need the pin valve to work. Cheers Mike ------------- Well...Putfile deleted all my pictures so I don't have a signature atm! |
Replies:
Posted By: tallen702
Date Posted: 06 April 2007 at 7:05pm
|
if it's got an on/off valve on the drop, it'll push the pin in on the pin-valve for the hpa tank. Some older ASA styles had pins that were too-short, but with an on/off, you don't really run into that issue. ------------- <Removed overly wide sig. Tsk, you know better.> |
Posted By: michaela2z
Date Posted: 07 April 2007 at 12:38pm
|
The pin has fallen out of the drop forwards on off, that the problem. I need to know how much shows so I know how long to cut a new one. Either that or ill go for the trail and error approach. ------------- Well...Putfile deleted all my pictures so I don't have a signature atm! |
tallen702 wrote:Posted By: tallen702
Date Posted: 08 April 2007 at 6:34pm
|
Ohh, that's a bit tricky then. See, if the pin is too long, it'll shut off the flow of air by blocking it where it flows around the pin, some remote lines have this issue. Of course, it's always better to err on the side of too-long since you can either cut it down, OR, back it off a quarter turn. ------------- <Removed overly wide sig. Tsk, you know better.> |
Posted By: michaela2z
Date Posted: 09 April 2007 at 2:00pm
|
Yeah that what I was thinking but I didn't wanna have it too long and damage anything inside the reg. Ill do a new thread just asking for a picture of the on off part off another bullet drop and I should be able to see roughly how long it is and also add a picture of mine with the missing part so they can see exactly what I am missing. THanks for the help anyway. ------------- Well...Putfile deleted all my pictures so I don't have a signature atm! |