98c overcocking
Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=166288
Printed Date: 03 March 2026 at 5:52am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 98c overcocking
Posted By: elloboloco
Subject: 98c overcocking
Date Posted: 19 April 2007 at 1:08pm
|
I just installed a DOP expansion chamber on my 98 custom E. Now every 20
shots or so, the guns cocking bolt goes too far and it wont fire. i have to manually push it forward a quarter inch or so before it will shoot again. who knows why? |
Replies:
Posted By: elloboloco
Date Posted: 19 April 2007 at 1:19pm
|
Well I read further into the forum and solved my own problem. hammer
binding when rear screws too tight. lol. and i was worried i had a serious problem. well, next task should be... pollishing my stuff. |
Posted By: Bruce A. Frank
Date Posted: 20 April 2007 at 10:03am
|
Good to see someone taking advantage of all the archived info available on the forums. Concentrate your polishing effort in the areas where you see scrape marks on the shell halves. -------------  
|
elloboloco wrote:Posted By: --Red--
Date Posted: 20 April 2007 at 11:10am
| brillo pads on the rear and front bolts as well as the power tube and then when it is nice and smoothed down using your brillo pads, take a towel and wd-40 and spray wd on your towel and rub down the entire gun getting the black residue off. |