Gun Maintenace and Repair - Response Trigger install help

Print Page | Close Window

Response Trigger install help

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=167954
Printed Date: 03 June 2026 at 7:30am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Response Trigger install help

Posted By: lookbhindu
Subject: Response Trigger install help
Date Posted: 21 June 2007 at 7:37pm

hey gang, I just installed my response trigger, wasnt too bad but I have two super small pins that I cant see where they go. I took a pic of everything before i took it apart but the pins are so small i cant figure out where they go. Per the instructions it doesnt account for them but i know they came out of the gun.

pls help.

-------------
I just wanna shoot somebody.

Replies:

Posted By: lookbhindu
Date Posted: 21 June 2007 at 8:47pm

ok gang. got it all put together (cyclone feed/response trigger kit) and it all works great. still not sure where the two pins go but read through instructions again and it still doesnt account for thre small pins.

-------------
I just wanna shoot somebody.

Posted By: whack-a-mole
Date Posted: 22 June 2007 at 12:07pm

Do you have these pins in?

http://www.packrat-toyz.com/images/Tippmann/98%20Response.jpg - http://www.packrat-toyz.com/images/Tippmann/98%20Response.jp g

-------------
NASA and the Americans spent millions of dollars and hundreds of hours to develop a pen that would write in space.....The Russians used a pencil.

Posted By: lookbhindu
Date Posted: 03 July 2007 at 10:53am

yes, those i have in. that is also a pic of the act model in the instruction manual. But I put the gun back together and kept the small pins in a bag just in case. thanks for the pic though

-------------
I just wanna shoot somebody.

Posted By: pitbull1100xx
Date Posted: 06 July 2007 at 1:35am

This is a 98 right? If so those pins are guide pins for the front/rear bolt connecting rod. I ran into the same issue when I put mine back together because as you stated the instructions don't cover them. If you look closely at top middle of the gun you'll see these 2 pins go over and under the connecting rod.

Posted By: gardy90
Date Posted: 19 July 2007 at 12:12am

yes, i had my friends 98c apart the other day to polish the internals for him, and i about forgot about those, it will prolly work for a little while without them but i wouldent try it as it seems the keep the rod in line

-------------
"FIRST THERE"

a-5
16" J&J ceramic
polished internals
X7 low profile hopper
costom painted 20 oz tank