Print Page | Close Window

02-64 Cylinder plug installed backwards

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=167988
Printed Date: 25 January 2026 at 8:53am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: 02-64 Cylinder plug installed backwards
Posted By: spsmith303
Subject: 02-64 Cylinder plug installed backwards
Date Posted: 22 June 2007 at 9:15pm
Does anyone know if its ok if PART 02-64 Cylinder Plug will work ok installed back wards. I know this is a minnor thing but just installed Tech T products and dont want to take all apart.



Replies:
Posted By: GBLoon
Date Posted: 25 June 2007 at 10:00pm
The plug has a ledge inside that the spring rests against.  It will work but not as efficiently.  Mine worked for a few months before I noticed it.  It may cause the spring to bind in the cylinder and you would lose the advantage of upgrades.  Bite the bullet and get the proper tools to take it apart again.


Posted By: Bruce A. Frank
Date Posted: 30 June 2007 at 11:33am

Originally posted by GBLoon GBLoon wrote:

The plug has a ledge inside that the spring rests against.  It will work but not as efficiently.  Mine worked for a few months before I noticed it.  It may cause the spring to bind in the cylinder and you would lose the advantage of upgrades.  Bite the bullet and get the proper tools to take it apart again.

What are the "proper tools?"

Marker Trouble? Read Maintenance Archive

Post #16.



-------------



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net