Gun Maintenace and Repair

Print Page | Close Window

Threads

Printed From: Tippmann Paintball
Category: Paintball Equipment
Forum Name: Gun Maintenace and Repair
Forum Description: Important info for keeping your marker in top shape
URL: http://www.tippmannsports.com/forum/wwf77a/forum_posts.asp?TID=168324
Printed Date: 27 September 2024 at 8:14pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Threads

Posted By: Gunchicken
Subject: Threads
Date Posted: 05 July 2007 at 3:45pm

http://tippmann.com/forum/wwf77a/forum_posts.asp?TID=168364&PN=1 - http://tippmann.com/forum/wwf77a/forum_posts.asp?TID=168364& amp;PN=1

Replies:

Posted By: The Guy
Date Posted: 05 July 2007 at 9:58pm

all hose fittings and gas lines are 1/8" NPT.

-------------
http://www.anomationanodizing.com - My Site

Posted By: Bruce A. Frank
Date Posted: 06 July 2007 at 1:48am

Gee, Gunchicken, I thought you knew it all! As The Guy said, 1/8" NPT(National Pipe Thread) also sometimes called "tapered pipe." And it is not a bit, it is a tap. If you need to clean up the threads on the hose fitting it requires a die of the same size. But, you then have probably spent as much, or close to, the cost of a new power valve or braid hose.

-------------

Posted By: Gunchicken
Date Posted: 06 July 2007 at 11:04am

http://tippmann.com/forum/wwf77a/forum_posts.asp?TID=168364&PN=1 - http://tippmann.com/forum/wwf77a/forum_posts.asp?TID=168364& amp;PN=1

Posted By: The Guy
Date Posted: 06 July 2007 at 1:22pm

if you already know, then why did you ask?

-------------
http://www.anomationanodizing.com - My Site

Posted By: Gunchicken
Date Posted: 06 July 2007 at 5:58pm

http://tippmann.com/forum/wwf77a/forum_posts.asp?TID=168364&PN=1 - http://tippmann.com/forum/wwf77a/forum_posts.asp?TID=168364& amp;PN=1

Posted By: RoboCop
Date Posted: 06 July 2007 at 6:21pm

Bruce was being sarcastic, gunchicken.

Sounds like you are on your man period. /sarcasm

Posted By: Gunchicken
Date Posted: 06 July 2007 at 9:49pm

http://tippmann.com/forum/wwf77a/forum_posts.asp?TID=168364&PN=1 - http://tippmann.com/forum/wwf77a/forum_posts.asp?TID=168364& amp;PN=1

Posted By: Bruce A. Frank
Date Posted: 07 July 2007 at 4:50pm

Gunchicken wrote:

Bruce A. Frank wrote:

Gee, Gunchicken, I thought you knew it all! As The Guy said, 1/8" NPT(National Pipe Thread) also sometimes called "tapered pipe." And it is not a bit, it is a tap. If you need to clean up the threads on the hose fitting it requires a die of the same size. But, you then have probably spent as much, or close to, the cost of a new power valve or braid hose.

what the heck is your problem? all i asked for was the size of the threads, not some big explination. how about posting what im asking for instead of telling me what i already know, ok?

LOL!! Telling you what you already know? How is one to fathom the depths of your lack of knowledge? When you refer to a "tap" as a "bit," it seems an indication of more ignorance than just a thread size!

Your short temper and inappreciativeness of the knowledge pool available from all the participants here, and the effort they put forth to answer your questions, will continue to make you a target for sarcasm.

-------------

Posted By: Gunchicken
Date Posted: 07 July 2007 at 5:28pm

http://tippmann.com/forum/wwf77a/forum_posts.asp?TID=168364&PN=1 - http://tippmann.com/forum/wwf77a/forum_posts.asp?TID=168364& amp;PN=1